cancel
Showing results for 
Search instead for 
Did you mean: 
Reply

Help with Permanently Deleting Emails in inbox older than 6 hours

Hello,

 

I'm really new to Power Automate and am struggling to try and get a flow working.  I'm trying to permanently delete (SHIFT+DELETE) all emails in the inbox that are older than 6 hours.  This is a special email inbox for notification emails only and I get a couple hundred emails an hour on average.  I'm hoping someone could help me get this working. 

 

This is what I have so far: 

I know the expression is not correct, but not sure exactly how to proceed.  I also don't think the delete is the permanent delete:

 

This is my expression:

addHours(utcNow(),-6,'yyyy-MM-dd hh:mm')

 

Capture.PNG 

Any help would be much appreciated. 

 

Thanks,  Tom

1 ACCEPTED SOLUTION

Accepted Solutions

Hi @Tomahawk,

 

Yes, the max value of the number to get Emails is 25 and you have a number of emails. Unfortunately, there is no way could turn on the number.

 

As a workaround, you could create a Flow to move these Emails which are not expired to another Folder. Then create a Flow to delete all of these Emails received time over 6 days. About how to delete a lot of Emails, you could refer to this post:

https://powerusers.microsoft.com/t5/General-Power-Automate/Delete-ALOT-of-emails/m-p/189530

 

Then inbox have no emails over 6 days, move these Emails which are not expired back to the inbox. Then create a Flow as below:

  1. When a new email arrives in the inbox;
  2. Delay 6 days;
  3. Delete it.

Annotation 2020-03-04 151461.png

 

Best Regards,
Community Support Team _ Lin Tu
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

View solution in original post

6 REPLIES 6
v-litu-msft
Community Support
Community Support

Hi @Tomahawk,

 

Firstly, the date format should be 'yyyy-MM-ddThh:mm:ssZ'.

Secondly, the condition should be "less than or equal to", not "greater than or equal to":

addHours(utcNow(),-6,'yyyy-MM-ddThh:mm:ssZ')

Annotation 2020-03-02 110759.png

 

Best Regards,
Community Support Team _ Lin Tu
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

Thanks for the response, however it is still not working even with the updated expression you provided.  Also wouldn't it be greater than since I'm getting emails that are older than 6 hours?  Please help me understand why it would be less than...  I'm clearly doing something wrong here so any help in getting this working would be much appreciated.  

Hi @Tomahawk,

 

For example, the UTC time is "2020/03/03T12:00:00Z" for now, and an email was received on "2020/03/03T03:00:00Z", it is older than 6 hours. The result of the UTC time sub 6 hours is "2020/03/03T06:00:00Z", the received time "2020/03/03T03:00:00Z" is less than the "2020/03/03T06:00:00Z".

 

One point I missed, the Email received time is not UTC time, it is your current time zone, you should convert the time, then use the converted time into the condition:

Annotation 2020-03-03 140713.png

 

Best Regards,
Community Support Team _ Lin Tu
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

Yea this is still failing.  It seems it's only scanning the first 25.  Could that be the problem where it's not able to look at the whole inbox?  Right now the first 25 are not older than 6 hours, so nothing should be happening to them.  How do I get it to look at the whole inbox?

Hi @Tomahawk,

 

Yes, the max value of the number to get Emails is 25 and you have a number of emails. Unfortunately, there is no way could turn on the number.

 

As a workaround, you could create a Flow to move these Emails which are not expired to another Folder. Then create a Flow to delete all of these Emails received time over 6 days. About how to delete a lot of Emails, you could refer to this post:

https://powerusers.microsoft.com/t5/General-Power-Automate/Delete-ALOT-of-emails/m-p/189530

 

Then inbox have no emails over 6 days, move these Emails which are not expired back to the inbox. Then create a Flow as below:

  1. When a new email arrives in the inbox;
  2. Delay 6 days;
  3. Delete it.

Annotation 2020-03-04 151461.png

 

Best Regards,
Community Support Team _ Lin Tu
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

Hi All,

 

I'm still having problems getting this working and the person who responded didn't help.  If anyone else has any ideas for this I would very much appreciate it.

 

Thanks

Helpful resources

Announcements

Community will be READ ONLY July 16th, 5p PDT -July 22nd

Dear Community Members,   We'd like to let you know of an upcoming change to the community platform: starting July 16th, the platform will transition to a READ ONLY mode until July 22nd.   During this period, members will not be able to Kudo, Comment, or Reply to any posts.   On July 22nd, please be on the lookout for a message sent to the email address registered on your community profile. This email is crucial as it will contain your unique code and link to register for the new platform encompassing all of the communities.   What to Expect in the New Community: A more unified experience where all products, including Power Apps, Power Automate, Copilot Studio, and Power Pages, will be accessible from one community.Community Blogs that you can syndicate and link to for automatic updates. We appreciate your understanding and cooperation during this transition. Stay tuned for the exciting new features and a seamless community experience ahead!

Summer of Solutions | Week 4 Results | Winners will be posted on July 24th

We are excited to announce the Summer of Solutions Challenge!    This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**   Week 1 Results: Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Community MembersNumber SolutionsSuper UsersNumber Solutions Deenuji 9 @NathanAlvares24  17 @Anil_g  7 @ManishSolanki  13 @eetuRobo  5 @David_MA  10 @VishnuReddy1997  5 @SpongYe  9JhonatanOB19932 (tie) @Nived_Nambiar  8 @maltie  2 (tie)   @PA-Noob  2 (tie)   @LukeMcG  2 (tie)   @tgut03  2 (tie)       Week 2 Results: Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 2: Community MembersSolutionsSuper UsersSolutionsPower Automate  @Deenuji  12@ManishSolanki 19 @Anil_g  10 @NathanAlvares24  17 @VishnuReddy1997  6 @Expiscornovus  10 @Tjan  5 @Nived_Nambiar  10 @eetuRobo  3 @SudeepGhatakNZ 8     Week 3 Results: Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 3:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji32ManishSolanki55VishnuReddy199724NathanAlvares2444Anil_g22SudeepGhatakNZ40eetuRobo18Nived_Nambiar28Tjan8David_MA22   Week 4 Results: Congratulations to the Week 4 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 4:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji11FLMike31Sayan11ManishSolanki16VishnuReddy199710creativeopinion14Akshansh-Sharma3SudeepGhatakNZ7claudiovc2CFernandes5 misc2Nived_Nambiar5 Usernametwice232rzaneti5 eetuRobo2   Anil_g2   SharonS2  

Check Out | 2024 Release Wave 2 Plans for Microsoft Dynamics 365 and Microsoft Power Platform

On July 16, 2024, we published the 2024 release wave 2 plans for Microsoft Dynamics 365 and Microsoft Power Platform. These plans are a compilation of the new capabilities planned to be released between October 2024 to March 2025. This release introduces a wealth of new features designed to enhance customer understanding and improve overall user experience, showcasing our dedication to driving digital transformation for our customers and partners.    The upcoming wave is centered around utilizing advanced AI and Microsoft Copilot technologies to enhance user productivity and streamline operations across diverse business applications. These enhancements include intelligent automation, AI-powered insights, and immersive user experiences that are designed to break down barriers between data, insights, and individuals. Watch a summary of the release highlights.    Discover the latest features that empower organizations to operate more efficiently and adaptively. From AI-driven sales insights and customer service enhancements to predictive analytics in supply chain management and autonomous financial processes, the new capabilities enable businesses to proactively address challenges and capitalize on opportunities.    

Updates to Transitions in the Power Platform Communities

We're embarking on a journey to enhance your experience by transitioning to a new community platform. Our team has been diligently working to create a fresh community site, leveraging the very Dynamics 365 and Power Platform tools our community advocates for.  We started this journey with transitioning Copilot Studio forums and blogs in June. The move marks the beginning of a new chapter, and we're eager for you to be a part of it. The rest of the Power Platform product sites will be moving over this summer.   Stay tuned for more updates as we get closer to the launch. We can't wait to welcome you to our new community space, designed with you in mind. Let's connect, learn, and grow together.   Here's to new beginnings and endless possibilities!   If you have any questions, observations or concerns throughout this process please go to https://aka.ms/PPCommSupport.   To stay up to date on the latest details of this migration and other important Community updates subscribe to our News and Announcements forums: Copilot Studio, Power Apps, Power Automate, Power Pages

Users online (534)