cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
ari-cornish
Frequent Visitor

Flow not showing up for run users

Hello,

 

My document approval flow is not showing up for my run users in SharePoint. The flow has worked for a few weeks now and nothing is wrong with the flow logic itself. I, the owner, can run and test the flow without a problem. It's just not appearing to my coworkers. 

 

However, I have noticed for myself (the owner) that the flow will appear in the top navigation but not in the selected drop-down. Is this an issue with my flow, Flow itself, or possibly SharePoint? 

Images attached: 

Flow not showing up for run users nor flow owner in the selected drop-downFlow not showing up for run users nor flow owner in the selected drop-down

 

Flow showing up ONLY for the flow owner and not for the run users in the top navigationFlow showing up ONLY for the flow owner and not for the run users in the top navigation

 

My flow logicMy flow logic

 

 

 

1 ACCEPTED SOLUTION

Accepted Solutions
ari-cornish
Frequent Visitor

The issue with Flow has seemed to resolve itself. My flow is now showing up in the top navigation and select drop-down. 

 

@Tom_Slosseyou were most likely correct that it was a bug on Microsoft's end and would correct itself in time. 

 

Thank you to everyone who replied! It was greatly appreciated!! 🙂 

View solution in original post

8 REPLIES 8
Anonymous
Not applicable

Can I ask how the Flow was created?  From blank or from the library?  I've seen Flow be a little buggy when you use the trigger "for a selected item" and create the Flow "from scratch" and exhibit this behavior.  It seems to be bug-free if you go to the library, click to create flow and choose any template that has the for a selected item.  Then get rid of all actions and create your Flow from there.  I believe I first heard of that tip from @WonderLaura.  

v-bacao-msft
Community Support
Community Support

Hi @ari-cornish ,

 

I did a test on my side. If you add other users as Run only users, they can also see and use the corresponding Flow on the top navigation.

Please take a try again.

As far as the Flow you mentioned cannot be displayed in the selected drop-down, I can reproduce similar problems here.

We have reported this issue and if there are any updates, we will post back.

 

Best Regards,

Community Support Team _ Barry
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
Dany
Advocate I
Advocate I

Hi All,

 

Same behavior here since yesterday. Flows don't show in the line item 3-dot menus. It works when selecting a line and using the Flow dropdown from the top menu however.

 

Same for the owner and users.

 

Regards,

Anonymous
Not applicable

UPDATE - it is working for run only users via the top menu now, however right click menu still doesn't show the flow. 

 

ORIGINAL POST:

I have been experiencing the same issue since late last week as well.  Flow was working fine.  No changes made.  Now run only users can't see the flows.  The behaviour is exactly the same as @ari-cornish has reported.  Any of the owners can run the flow, however run only users can't.  The owners can only run the flow via the Flow in the menu at the top.  If we right click and try and select the Flow the option isn't there.  

 

Any news on this issue? 

We experience the same problem. Owners can see and run all the flows but the "run only users" can't even see the flow in the dropdown:

 

run only user:

flow-nok.png

 

 

 

 

 

 

 

owner:

flow-ok.png

All

 

 

This is probably a bug.

It used to work, so I guess they will fix this eventually.

 

Kind regards

 

 

Tom



If this reply has answered your question or solved your issue, please mark this question as answered.

Answered questions helps users in the future who may have the same issue or question quickly find a resolution via search. If you liked my response, please consider giving it a thumbs up.

ari-cornish
Frequent Visitor

The issue with Flow has seemed to resolve itself. My flow is now showing up in the top navigation and select drop-down. 

 

@Tom_Slosseyou were most likely correct that it was a bug on Microsoft's end and would correct itself in time. 

 

Thank you to everyone who replied! It was greatly appreciated!! 🙂 

JPSC
New Member

Make sure you have shared the Flow under the Run Only Users SETTINGS.

 

JPSC_0-1656502975827.png

Then select who gets to see the flow

 

JPSC_1-1656503011934.png

 

Helpful resources

Announcements

Community will be READ ONLY July 16th, 5p PDT -July 22nd

Dear Community Members,   We'd like to let you know of an upcoming change to the community platform: starting July 16th, the platform will transition to a READ ONLY mode until July 22nd.   During this period, members will not be able to Kudo, Comment, or Reply to any posts.   On July 22nd, please be on the lookout for a message sent to the email address registered on your community profile. This email is crucial as it will contain your unique code and link to register for the new platform encompassing all of the communities.   What to Expect in the New Community: A more unified experience where all products, including Power Apps, Power Automate, Copilot Studio, and Power Pages, will be accessible from one community.Community Blogs that you can syndicate and link to for automatic updates. We appreciate your understanding and cooperation during this transition. Stay tuned for the exciting new features and a seamless community experience ahead!

Summer of Solutions | Week 4 Results | Winners will be posted on July 24th

We are excited to announce the Summer of Solutions Challenge!    This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**   Week 1 Results: Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Community MembersNumber SolutionsSuper UsersNumber Solutions Deenuji 9 @NathanAlvares24  17 @Anil_g  7 @ManishSolanki  13 @eetuRobo  5 @David_MA  10 @VishnuReddy1997  5 @SpongYe  9JhonatanOB19932 (tie) @Nived_Nambiar  8 @maltie  2 (tie)   @PA-Noob  2 (tie)   @LukeMcG  2 (tie)   @tgut03  2 (tie)       Week 2 Results: Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 2: Community MembersSolutionsSuper UsersSolutionsPower Automate  @Deenuji  12@ManishSolanki 19 @Anil_g  10 @NathanAlvares24  17 @VishnuReddy1997  6 @Expiscornovus  10 @Tjan  5 @Nived_Nambiar  10 @eetuRobo  3 @SudeepGhatakNZ 8     Week 3 Results: Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 3:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji32ManishSolanki55VishnuReddy199724NathanAlvares2444Anil_g22SudeepGhatakNZ40eetuRobo18Nived_Nambiar28Tjan8David_MA22   Week 4 Results: Congratulations to the Week 4 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 4:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji11FLMike31Sayan11ManishSolanki16VishnuReddy199710creativeopinion14Akshansh-Sharma3SudeepGhatakNZ7claudiovc2CFernandes5 misc2Nived_Nambiar5 Usernametwice232rzaneti5 eetuRobo2   Anil_g2   SharonS2  

Check Out | 2024 Release Wave 2 Plans for Microsoft Dynamics 365 and Microsoft Power Platform

On July 16, 2024, we published the 2024 release wave 2 plans for Microsoft Dynamics 365 and Microsoft Power Platform. These plans are a compilation of the new capabilities planned to be released between October 2024 to March 2025. This release introduces a wealth of new features designed to enhance customer understanding and improve overall user experience, showcasing our dedication to driving digital transformation for our customers and partners.    The upcoming wave is centered around utilizing advanced AI and Microsoft Copilot technologies to enhance user productivity and streamline operations across diverse business applications. These enhancements include intelligent automation, AI-powered insights, and immersive user experiences that are designed to break down barriers between data, insights, and individuals. Watch a summary of the release highlights.    Discover the latest features that empower organizations to operate more efficiently and adaptively. From AI-driven sales insights and customer service enhancements to predictive analytics in supply chain management and autonomous financial processes, the new capabilities enable businesses to proactively address challenges and capitalize on opportunities.    

Updates to Transitions in the Power Platform Communities

We're embarking on a journey to enhance your experience by transitioning to a new community platform. Our team has been diligently working to create a fresh community site, leveraging the very Dynamics 365 and Power Platform tools our community advocates for.  We started this journey with transitioning Copilot Studio forums and blogs in June. The move marks the beginning of a new chapter, and we're eager for you to be a part of it. The rest of the Power Platform product sites will be moving over this summer.   Stay tuned for more updates as we get closer to the launch. We can't wait to welcome you to our new community space, designed with you in mind. Let's connect, learn, and grow together.   Here's to new beginnings and endless possibilities!   If you have any questions, observations or concerns throughout this process please go to https://aka.ms/PPCommSupport.   To stay up to date on the latest details of this migration and other important Community updates subscribe to our News and Announcements forums: Copilot Studio, Power Apps, Power Automate, Power Pages

Users online (1,642)