cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
kensley
Resolver II
Resolver II

How to concatenate HTML if Approval Response variable has text?

I am using the "Start and wait for an approval" connector within my custom flow.  I am also adding a response variable inside an send mail v2 connector, so that any responses from the approver get sent to the submitter who filled out the form.  But I would like to concatenate HTML before the response, only if there's a response from the approver.  Is this possible to setup a condition like this from within Power Automate?

 

Something like this 

 

(if there is a response from the approver)

<p>the part before the response</p>

The actual response

 

 

1 ACCEPTED SOLUTION

Accepted Solutions
Rahber
Solution Sage
Solution Sage

Initialize a variable and then in the condition of approvals you can add text to that variable and the outcome variable only if there was a response. If the response is no the variable will still be empty as i initialized it as empty

 

Please see the image below

Capture.PNG

Please click Accept as Solution if it resolved your problem or give it a Thumbs Up if it helped you in anyway this will allow other people to search correct solutions effectively.

Thanks,
Rahber

View solution in original post

7 REPLIES 7
Rahber
Solution Sage
Solution Sage

Initialize a variable and then in the condition of approvals you can add text to that variable and the outcome variable only if there was a response. If the response is no the variable will still be empty as i initialized it as empty

 

Please see the image below

Capture.PNG

Please click Accept as Solution if it resolved your problem or give it a Thumbs Up if it helped you in anyway this will allow other people to search correct solutions effectively.

Thanks,
Rahber

Jcook
Most Valuable Professional
Most Valuable Professional

Hello @kensley 

 

Yes you can use an IF expression right inside the email.

Try:

if(equals(empty(<Your Response>)),true,’ ‘,’the part before the response’)

 

this expression is saying: if the response is empty put nothing, if the response is NOT empty put the part before the response.

 

please note the 2 single quotes after true, do not need to have a space in between. But I added a space to be easily read on this post.


Did I answer your question? Mark my post as a solution!

If you like my post please hit the Thumbs Up


Proud to be a Flownaut!


Check out my blog for Power Automate tips,
tricks, and guides
FlowAltDelete





@Jcook, many many thanks on that example you provided. Where can I go to learn how to do what you just did, but for variables? Where can I learn the syntax? I'm trying to get a variable into an if condition, as an expression, for the body of my email. But I feel that I am failing because every time I run my flow, it causes an error.

 

For example, this fails me:

if(equals(empty(variables('approver_comment'))),true,'','<h2>A message by the Approver</h2>')

 

 

Thanks for any tips on variable usage!

Jcook
Most Valuable Professional
Most Valuable Professional

@kensley 

 

What error are you seeing?


Did I answer your question? Mark my post as a solution!

If you like my post please hit the Thumbs Up


Proud to be a Flownaut!


Check out my blog for Power Automate tips,
tricks, and guides
FlowAltDelete





Thanks for the help! When I put the following code into my expression field, and click "ok" to then add it into the body area of my "Send an email V2" Connector...

 

 

if(equals(empty(variables('approver_comment'))),true,'','<h2>A message by the Approver</h2>')

 

 

PA complains before sending that e-mail out and says....

 

 Unable to process template language expressions in action 'Accept_-_Send_an_email_(V2)_-_Requester' inputs at line '1' and column '48999': 'The template language function 'if' expects three parameter: the condition to test as the first parameter, the value to return if the condition is true as the second parameter, and the value to return if the condition is false as the third parameter. The function was invoked with '4' parameter(s). Please see https://aka.ms/logicexpressions#if for usage details.'.

 

Sorry for any bonehead mistakes I'm making.

Jcook
Most Valuable Professional
Most Valuable Professional

Hi @kensley 

 

Sorry but could you post a screenshot of the expression inside the email action?


Did I answer your question? Mark my post as a solution!

If you like my post please hit the Thumbs Up


Proud to be a Flownaut!


Check out my blog for Power Automate tips,
tricks, and guides
FlowAltDelete





Jcook
Most Valuable Professional
Most Valuable Professional

@kensley 

 

Sorry.. That is my fault.

The correct expression would be:

if(empty(variables('approver_comment')),'','<h2>A message by the Approver</h2>')

Since empty() returns true if the value is empty. 


Did I answer your question? Mark my post as a solution!

If you like my post please hit the Thumbs Up


Proud to be a Flownaut!


Check out my blog for Power Automate tips,
tricks, and guides
FlowAltDelete





Helpful resources

Announcements

Community will be READ ONLY July 16th, 5p PDT -July 22nd

Dear Community Members,   We'd like to let you know of an upcoming change to the community platform: starting July 16th, the platform will transition to a READ ONLY mode until July 22nd.   During this period, members will not be able to Kudo, Comment, or Reply to any posts.   On July 22nd, please be on the lookout for a message sent to the email address registered on your community profile. This email is crucial as it will contain your unique code and link to register for the new platform encompassing all of the communities.   What to Expect in the New Community: A more unified experience where all products, including Power Apps, Power Automate, Copilot Studio, and Power Pages, will be accessible from one community.Community Blogs that you can syndicate and link to for automatic updates. We appreciate your understanding and cooperation during this transition. Stay tuned for the exciting new features and a seamless community experience ahead!

Summer of Solutions | Week 4 Results | Winners will be posted on July 24th

We are excited to announce the Summer of Solutions Challenge!    This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**   Week 1 Results: Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Community MembersNumber SolutionsSuper UsersNumber Solutions Deenuji 9 @NathanAlvares24  17 @Anil_g  7 @ManishSolanki  13 @eetuRobo  5 @David_MA  10 @VishnuReddy1997  5 @SpongYe  9JhonatanOB19932 (tie) @Nived_Nambiar  8 @maltie  2 (tie)   @PA-Noob  2 (tie)   @LukeMcG  2 (tie)   @tgut03  2 (tie)       Week 2 Results: Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 2: Community MembersSolutionsSuper UsersSolutionsPower Automate  @Deenuji  12@ManishSolanki 19 @Anil_g  10 @NathanAlvares24  17 @VishnuReddy1997  6 @Expiscornovus  10 @Tjan  5 @Nived_Nambiar  10 @eetuRobo  3 @SudeepGhatakNZ 8     Week 3 Results: Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 3:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji32ManishSolanki55VishnuReddy199724NathanAlvares2444Anil_g22SudeepGhatakNZ40eetuRobo18Nived_Nambiar28Tjan8David_MA22   Week 4 Results: Congratulations to the Week 4 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 4:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji11FLMike31Sayan11ManishSolanki16VishnuReddy199710creativeopinion14Akshansh-Sharma3SudeepGhatakNZ7claudiovc2CFernandes5 misc2Nived_Nambiar5 Usernametwice232rzaneti5 eetuRobo2   Anil_g2   SharonS2  

Check Out | 2024 Release Wave 2 Plans for Microsoft Dynamics 365 and Microsoft Power Platform

On July 16, 2024, we published the 2024 release wave 2 plans for Microsoft Dynamics 365 and Microsoft Power Platform. These plans are a compilation of the new capabilities planned to be released between October 2024 to March 2025. This release introduces a wealth of new features designed to enhance customer understanding and improve overall user experience, showcasing our dedication to driving digital transformation for our customers and partners.    The upcoming wave is centered around utilizing advanced AI and Microsoft Copilot technologies to enhance user productivity and streamline operations across diverse business applications. These enhancements include intelligent automation, AI-powered insights, and immersive user experiences that are designed to break down barriers between data, insights, and individuals. Watch a summary of the release highlights.    Discover the latest features that empower organizations to operate more efficiently and adaptively. From AI-driven sales insights and customer service enhancements to predictive analytics in supply chain management and autonomous financial processes, the new capabilities enable businesses to proactively address challenges and capitalize on opportunities.    

Updates to Transitions in the Power Platform Communities

We're embarking on a journey to enhance your experience by transitioning to a new community platform. Our team has been diligently working to create a fresh community site, leveraging the very Dynamics 365 and Power Platform tools our community advocates for.  We started this journey with transitioning Copilot Studio forums and blogs in June. The move marks the beginning of a new chapter, and we're eager for you to be a part of it. The rest of the Power Platform product sites will be moving over this summer.   Stay tuned for more updates as we get closer to the launch. We can't wait to welcome you to our new community space, designed with you in mind. Let's connect, learn, and grow together.   Here's to new beginnings and endless possibilities!   If you have any questions, observations or concerns throughout this process please go to https://aka.ms/PPCommSupport.   To stay up to date on the latest details of this migration and other important Community updates subscribe to our News and Announcements forums: Copilot Studio, Power Apps, Power Automate, Power Pages

Users online (1,791)