I recently had to refactor some flows because not everyone that would use it had acess to exchange online, so I had to change the Outlook - Send email to the standard Send Email Notification v3 to guarantee that everyone gets the mail.
It should be a simple replacement task but when it came down to testing the flow it didn't actually send the emails even though it says it did.
I have 3 emails being sent with this connector and an approval in the middle. I only get an email from the Approval bit.
Has anyone experienced this?
Hi MangoMan09,
you'll need to share a bit more data, if you can.
the flow screenshot and the last the run status that you said finished with success
usually when the flow is green it finished fine and did what it should. I use v3 send email and don't have any issues so lets start with more data on your speific case that can help troubleshoot this
@rogrimbe sorry, I forgot to add those.
In the meantime I made a simpler version of the flow with only 1 variable and no approval, but in the end I had no luck.
It shows it ran successfuly but I don't receive the email.
Hi MangoMan09,
thanks for the extra data, now I can see that you are using the SendGrid connector as the email notifications when you said change the outlook I failed to understand that so good thing you added that screenshot,
I've just tested it and it is working fine for me. one var with my email and got the mail.
below is the example mail received, did you double check the jank\spam? or maybe once got such emails and decided to unsubscribe? like the email says? (referring to aka.ms/flow-mail)
@rogrimbe thanks for the input.
I tried sending to a couple other email addresses but I had no return emails again.
I checked all the email boxed and found nothing in them (spam, trash, etc). It's really strange that it worked once and never again. It's not even a complex flow to begin with...
I agree, its not.
and the fact that it is reaching the email and says it working is starnge.
maybe stuck somewhere in the middle
Unfortuntly I can't be of any assistance here since I can't reproduce this.
maybe next step is to open an issue with Flow specific to this connector if you have no issue just sending an email to yourself with the other connectors like the outlook.
Hi @Anonymous,
Have you checked the Junk Email? Maybe you've created a Flow before that when the Email with special subject arrives, delete it or move it to the Junk Email.
Have you tried to use another account to create this Flow? And how it runs?
Best Regards,
Community Support Team _ Lin Tu
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
@rogrimbe Outlook was working fine but the custumer im working for doesn't have an exchange online account for all of the users so we had to swap connectors.
@v-litu-msft and @rogrimbe I tried on a whole enviornment all together and spammed flow. I got all of the emails so there's some hidden throttling on the enviornment I'm developing.
Hi @Anonymous,
Have you tried recreating the SendGrid connection?
Best Regards,
Community Support Team _ Lin Tu
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
After some more testing I managed to get it working.
I went back to the outlook connector as that one was sending the messages just fine.
Then I changed the trigger from the PowerApps to running when a new row was added on the DB. This way they flow ran as intended and we don't have to worry about assigning more keys to the users later on.
Going to https://aka.ms/flow-mail and reinstating my email address did the trick for me. Thanks for the pointer!
Hi
I have encountered the same problem. I have one recurrence flow that send an email notification (V3) to users (Outlook) every day. The flow was working fine previously until yesterday (19/6/2020). I check the status is "Succeeded" but the email was not received by the users. I tried adding my personal email into the recipient and did receive the notification. It seems that there's something not working as it is between flow and outlook and it's really frustrating.
Hi all,
Encountered the same issue, can any of the experts guide me please?
It showed my flow ran successfully, but I did not receive any emails to my inbox. 😞
Please expedite help, thank you much!
Same here.
My flows with v3 connector have been successfully sending emails until few weeks ago and now they act really strange. I have had 5 flows sending emails scheduled for today and only 1 of them I received. And all the flows have succeeded status.
Just for testing purpose I have created another simple instant manual flow having only send email notification v3 connector and tested it and it is not sending emails and again status is succeeded.
Checked on my email server and no spam filter or anything else there. Did this reinstating of my address on https://aka.ms/flow-mail even though I never unsubscribed but that didn't help...
Does anyone knows what is going on and where to look for solution?
Hm. I have some progress here. It turns out that if I put some other email address in To: field and I was testing with one Gmail and one Hotmail account it works. And when I put my company email address it still does not receives emails from microsoft@powerapps.com. Is it possible that our domain or certain email addresses on our domain after some time and few received emails have somehow became blocked from receiving emails from this connector?
Once more, our spam filter is not blocking...
Dear Community Members, We'd like to let you know of an upcoming change to the community platform: starting July 16th, the platform will transition to a READ ONLY mode until July 22nd. During this period, members will not be able to Kudo, Comment, or Reply to any posts. On July 22nd, please be on the lookout for a message sent to the email address registered on your community profile. This email is crucial as it will contain your unique code and link to register for the new platform encompassing all of the communities. What to Expect in the New Community: A more unified experience where all products, including Power Apps, Power Automate, Copilot Studio, and Power Pages, will be accessible from one community.Community Blogs that you can syndicate and link to for automatic updates. We appreciate your understanding and cooperation during this transition. Stay tuned for the exciting new features and a seamless community experience ahead!
We are excited to announce the Summer of Solutions Challenge! This challenge is kicking off on Monday, June 17th and will run for (4) weeks. The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions to as many questions as you can. Answers can be provided in all the communities. Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”) - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024 Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods. You must enter into each weekly Entry Period separately. How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different. Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers. At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing. Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner. A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random. Individuals will be contacted before the announcement with the opportunity to claim or deny the prize. Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners. Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event. ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE** Week 1 Results: Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Community MembersNumber SolutionsSuper UsersNumber Solutions Deenuji 9 @NathanAlvares24 17 @Anil_g 7 @ManishSolanki 13 @eetuRobo 5 @David_MA 10 @VishnuReddy1997 5 @SpongYe 9JhonatanOB19932 (tie) @Nived_Nambiar 8 @maltie 2 (tie) @PA-Noob 2 (tie) @LukeMcG 2 (tie) @tgut03 2 (tie) Week 2 Results: Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 2: Community MembersSolutionsSuper UsersSolutionsPower Automate @Deenuji 12@ManishSolanki 19 @Anil_g 10 @NathanAlvares24 17 @VishnuReddy1997 6 @Expiscornovus 10 @Tjan 5 @Nived_Nambiar 10 @eetuRobo 3 @SudeepGhatakNZ 8 Week 3 Results: Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 3:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji32ManishSolanki55VishnuReddy199724NathanAlvares2444Anil_g22SudeepGhatakNZ40eetuRobo18Nived_Nambiar28Tjan8David_MA22 Week 4 Results: Congratulations to the Week 4 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 4:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji11FLMike31Sayan11ManishSolanki16VishnuReddy199710creativeopinion14Akshansh-Sharma3SudeepGhatakNZ7claudiovc2CFernandes5 misc2Nived_Nambiar5 Usernametwice232rzaneti5 eetuRobo2 Anil_g2 SharonS2
On July 16, 2024, we published the 2024 release wave 2 plans for Microsoft Dynamics 365 and Microsoft Power Platform. These plans are a compilation of the new capabilities planned to be released between October 2024 to March 2025. This release introduces a wealth of new features designed to enhance customer understanding and improve overall user experience, showcasing our dedication to driving digital transformation for our customers and partners. The upcoming wave is centered around utilizing advanced AI and Microsoft Copilot technologies to enhance user productivity and streamline operations across diverse business applications. These enhancements include intelligent automation, AI-powered insights, and immersive user experiences that are designed to break down barriers between data, insights, and individuals. Watch a summary of the release highlights. Discover the latest features that empower organizations to operate more efficiently and adaptively. From AI-driven sales insights and customer service enhancements to predictive analytics in supply chain management and autonomous financial processes, the new capabilities enable businesses to proactively address challenges and capitalize on opportunities.
We're embarking on a journey to enhance your experience by transitioning to a new community platform. Our team has been diligently working to create a fresh community site, leveraging the very Dynamics 365 and Power Platform tools our community advocates for. We started this journey with transitioning Copilot Studio forums and blogs in June. The move marks the beginning of a new chapter, and we're eager for you to be a part of it. The rest of the Power Platform product sites will be moving over this summer. Stay tuned for more updates as we get closer to the launch. We can't wait to welcome you to our new community space, designed with you in mind. Let's connect, learn, and grow together. Here's to new beginnings and endless possibilities! If you have any questions, observations or concerns throughout this process please go to https://aka.ms/PPCommSupport. To stay up to date on the latest details of this migration and other important Community updates subscribe to our News and Announcements forums: Copilot Studio, Power Apps, Power Automate, Power Pages