cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Tommy_Gunz
Frequent Visitor

Condition navigation based on one of the columns value in web

Hi,

 

I am new to PA, running desktop ver. 2.17.169.22042 and need little help please.

 

I got HTML table with 4 columns. Column 2 has a URL, standard HTML <a> tag which leads to another HTML page. Column 3 is the status column and holds 2 values, either “A” or “B”. On page load, I am trying to find a row that has status value “A” and when the flow find it, I want it to click the URL in column 2 in the corresponding row. So if table holds 5 rows, and only 3rd row holds the value of status “A”, and remaining rows are status “B”, like below:

 

col1 | col2 | col3 | col4
-----------------------------
xxxx |URL1|   B   | xxxx
xxxx |URL2|   B   | xxxx
xxxx |URL3|   A   | xxxx
xxxx |URL4|   B   | xxxx
xxxx |URL5|   B   | xxxx

I would like for the flow to find value “A” in row 3 and click "URL3", and if possible open that corresponding HTML page in a new tab of the same browser instance as if target=“_blank”.

 

Any help would be appreciated.

Thank you

Tom

1 ACCEPTED SOLUTION

Accepted Solutions
VJR
Multi Super User
Multi Super User

Hi @Tommy_Gunz 

 

It would be easier to do this after you get that HTML table into a Datatable inside of PAD (rather than doing it on the html table itself).

 

To do this, use "Extract data from web page" to capture the html table which would return the results in a datatable after running this action. (Additional action: Here you can play around with the selectors to capture the table only for the Status column having A. But if you are not able to set the right selector, then simply capture the entire table and proceed to next step below.)

 

Then loop through the datatable and using an IF condition check if the Status column is A.

If yes fetch the url within the same row, then use "go to web page" to navigate to that url.

 

View solution in original post

14 REPLIES 14
VJR
Multi Super User
Multi Super User

Hi @Tommy_Gunz 

 

It would be easier to do this after you get that HTML table into a Datatable inside of PAD (rather than doing it on the html table itself).

 

To do this, use "Extract data from web page" to capture the html table which would return the results in a datatable after running this action. (Additional action: Here you can play around with the selectors to capture the table only for the Status column having A. But if you are not able to set the right selector, then simply capture the entire table and proceed to next step below.)

 

Then loop through the datatable and using an IF condition check if the Status column is A.

If yes fetch the url within the same row, then use "go to web page" to navigate to that url.

 

Tommy_Gunz
Frequent Visitor

Hi VJR,

 

Thank you for responding. I like the idea to a data table. Finding "A" in the row I think I figured out but once I find it, how do I tell the flow to click the URL in the previous column in the corresponding row. Do I count <td> tags in <tr> and somehow programmatically say <td> -1 or something. How do I "If yes fetch the url within the same row, then use "go to web page".

 

Thank you

Tom

VJR
Multi Super User
Multi Super User

Hi @Tommy_Gunz 

 

Since you are getting the HTML table into a Datatable, there is no working with html tags like <tr> and <td>.

You will now be looping on the Datatable which is a type of variable in PAD.

 

After extracting the html table into a Datatable it would look like the below.

 

VJR_2-1647398860072.png

 

You use the For Each loop on the Datatable.

 

VJR_1-1647398817646.png

 

 

Instead of the "Display message", use the "Go to Web page" action with the above URL.

 

 

Tommy_Gunz
Frequent Visitor

Hi VJR,

 

Man, I was soooo close! The fact that “CurrentItem” variable plus the column has to be wrapped around %% together %CurrentItem ['Value #3']% like so, what I was missing. I was putting my column reference outside the % like so %CurrentItem% ['Value #6'] which did not work! Bummer....  😞

 

In addition, I read an articles relating to columns in the data table as "Col1", "Col2" etc. which confused me even more. You need to reference these columns as they are in your flow variables section as 'Value #1', 'Value #2’, 'Value #3’ and so on with single quotes around it… wow… details ha?

 

So I have one more question for you, in my initial explanation of this challenge I incorrectly stated that the value in column 2 is URL. It is actually hyperlink and each row leads to different record.

 

When I played with CSS selectors I learned that you can specify the “Href” attribute to get the actual URL from it. Is there a way to add that attribute here %CurrentItem ['Value #3']% to get to the URL, so then I can pass it to "Go to Web page" action or there is another way?

 

Please let me know,

 

Thank you so much,

Tom

@Tommy_Gunz 

 

During the extraction, right click on the hyperlink -> Extract element value -> href

 

VJR_0-1647573651215.png

 

 

Do this for the first and the second hyperlink and PAD will automatically create a table showing the hyperlinks as seen on the left hand side.

 

Note that I have also done the same for the Company column and therefore it is showing up under Value #1.

 

Note in the html code on the far left the link text is different than the actual URL.

VJR_1-1647573747001.png

 

 

This video will help you achieve all that you are looking for getting the hyperlinks.

Tommy_Gunz
Frequent Visitor

Hi VJR,

 

Wow, that is exactly what I was missing. I have learned a lot from you. I really appreciate you taking your time to help me out… it means a lot… I think I got enough for now to keep it on.  

 

Once again thank you,

Tom

Dear All, i'd love to deepen a bit more this topi as it sounds to me interesting.

To my case, the urls are not showing, they are stored into the as data-url attribute value which is an attribute of <tr> taf meaning "right click → exact element value → href" is not available

how to step forward and grab those urls to loop into the pages and retreive the datas we want in each single pages?

many thanks in advance for replies,

regards,

Fred

Hi Fred,

 

I think I have figured this out... Since you didn't provide sample code in your question, I have googled for "data-url attribute" and found this article  on Stack Over follow: "https://stackoverflow.com/questions/18227375/what-are-data-url-and-data-key-attributes-of-a-tag"

 

Dude there, offers source code of his<a> tag with "data-url" attrib.

 

Tommy_Gunz_0-1648156568590.png

When you click on that link it takes you to the source code of the link

 

Tommy_Gunz_1-1648156653326.png

 

I took that code and stage a sample page to demo a solution in PAD for you. Closer look reviles he got <a> tag and <img> tag for which we don't care, right?

 

Tommy_Gunz_2-1648156764858.png

 

I assume what you after in this example is the following:

 

data-url="https://www.facebook.com/sharer.php?u=http%3A%2F%2Fkoapi.heroku.com%3Fkid%3D1S05t=Caring%20is%20shar..."

 

data-url="https://twitter.com/share?url=http%3A%2F%2Fkoapi.heroku.com%3Fkid%3D1S05&amp;text=Join%20the%20revol...!"

 

and so on....

 

When you look at the render page of this stage sample, it looks like this. Four URL links and email:

 

Tommy_Gunz_3-1648156970591.png

So, in PAD I created new flow which look like this

 

Tommy_Gunz_4-1648157011481.png

 

Here I have open that sample page in Firefox... Personally I don't think PAD will care what browser you use...

 

Tommy_Gunz_5-1648157060986.png

 

Next, I did "Extract Data From Page" action

 

Tommy_Gunz_6-1648157190505.png

 

and here is the PAD magic I think you are seeking...

 

You can't see but I pointed my mouse pointer with the extract tool on the link and the tool first picked up the <img> tag.

 

Tommy_Gunz_7-1648157326592.png

 

But when you move your mouse pointer around that area, eventual you hit that <a> tag. Then just grab that Href. as is..

 

Tommy_Gunz_9-1648158119802.png

The URL that was captured is not what you want but that's OK for now! I have then done the same thing to the second URL, then right click, extract the element and get the second Href. A parentally in PAD when you do that twice int he row PAD is going to assume you want them all and will grab them like so..

 

Tommy_Gunz_13-1648159377316.png

 

Next click "Advanced Settings"

 

Tommy_Gunz_14-1648159450294.png

 

and change that attribute to from "Href" to "Data-url" and click Finish...

 

Tommy_Gunz_15-1648159494016.png

 

and there they are....

 

Tommy_Gunz_16-1648159554426.png

 

Notice, it picked up the private URLs as what I think you were after...

 

and so when I ran my test flow I  get it here

 

Tommy_Gunz_17-1648159676204.png

 

At this point If you got a table just wrap that up in the fore each loop just like VJR thought me and you should be good to go...

 

I hope this helps..

 

let me know...

 

Tom

 

 

 

 

 

 

 

 

Hello Tom, thanks for reply,

There is no <a> tag, only <tr> tag with the data-url attribute inside so meaning i don't find a way to grab those urls...

Another guess please?

thanks

Fred

Whooo Guys, i almost solved my issue ... Now i have another one, each record i make in the for each loop is creating a new spreadsheet (excel). I don't understand why, all the data extracted should be in list in one excel table no?

i extrat from each page of the list of urls and then translate to excelinstance but it seems it creates several variable (several sheets), how to solve this issue please?

thank you

fred

Hi Fred,

 

It would be nice if you provided code example with your problem.... it would ease off on that Mickey mouse back and forth.... but here you go...

 

I have modified my original sample page and moved the twitter and facebook data-url  to <tr> tag and I have commented out all of the <a> tags on the page. I assume thats what you meant, see below...

 

Tommy_Gunz_0-1648504369864.png

 

When I tried to use the data extract tool on the page I was picking up only <table>, <th> and <td>, no <tr>...

 

Tommy_Gunz_1-1648504599761.png

 

So what I did is I picked the <th> first, then <td>to prove the point PAD don't care which tag hold what attribute. All fair game... so it seems...

 

Tommy_Gunz_2-1648504686343.png

Tommy_Gunz_3-1648504748654.png

 

Then in the data tool I ended up with this:

 

Tommy_Gunz_4-1648504786036.png

 

Then just click the "Advanced Settings", bottom left..

 

Tommy_Gunz_5-1648504863822.png

I grab the 2 values for the CSS selector and modified it as below. Dropped what I don't need.

 

Tommy_Gunz_6-1648504973164.png

 

Then just made sure that the attribute textbox got data-url, then just click OK.

 

Tommy_Gunz_7-1648505079940.png

 

Next thing you know, what you know... Here are your links... 

 

Tommy_Gunz_8-1648505173159.png

 

You know the rest

 

I hope this helps...

Tom

 

Hello Tom, thank you very much but it's not any more my issue as i solved my major matter on this project.

I'm now trying to get all the data collected in a single spreadsheet instead of having each data rows in several spreadsheets (1 row of datas = 1 sheets)

i'm able now to collected the data i wanted but i want to condensate it in a single excel table

regards

fred

@VJR @Tommy_Gunz hello guys thanks motivating me! after hours of testing and searches i finally succeeded in my flow

I have now one single table in my excel spreasheet with all the datas i wanted ...

With this done, i'm building a perfect prospection database for my services!

Many Thanks guys and don't hesitate if i can help but i think you are better in this RPA domain.

Awesome Fred... Glad I was able to help.... Pay it forward... Mark it as accepted solution and give some thumbs up so I can catch up with VJR....

 

Later,

Tom

Helpful resources

Announcements

Community will be READ ONLY July 16th, 5p PDT -July 22nd

Dear Community Members,   We'd like to let you know of an upcoming change to the community platform: starting July 16th, the platform will transition to a READ ONLY mode until July 22nd.   During this period, members will not be able to Kudo, Comment, or Reply to any posts.   On July 22nd, please be on the lookout for a message sent to the email address registered on your community profile. This email is crucial as it will contain your unique code and link to register for the new platform encompassing all of the communities.   What to Expect in the New Community: A more unified experience where all products, including Power Apps, Power Automate, Copilot Studio, and Power Pages, will be accessible from one community.Community Blogs that you can syndicate and link to for automatic updates. We appreciate your understanding and cooperation during this transition. Stay tuned for the exciting new features and a seamless community experience ahead!

Summer of Solutions | Week 4 Results | Winners will be posted on July 24th

We are excited to announce the Summer of Solutions Challenge!    This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**   Week 1 Results: Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Community MembersNumber SolutionsSuper UsersNumber Solutions Deenuji 9 @NathanAlvares24  17 @Anil_g  7 @ManishSolanki  13 @eetuRobo  5 @David_MA  10 @VishnuReddy1997  5 @SpongYe  9JhonatanOB19932 (tie) @Nived_Nambiar  8 @maltie  2 (tie)   @PA-Noob  2 (tie)   @LukeMcG  2 (tie)   @tgut03  2 (tie)       Week 2 Results: Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 2: Community MembersSolutionsSuper UsersSolutionsPower Automate  @Deenuji  12@ManishSolanki 19 @Anil_g  10 @NathanAlvares24  17 @VishnuReddy1997  6 @Expiscornovus  10 @Tjan  5 @Nived_Nambiar  10 @eetuRobo  3 @SudeepGhatakNZ 8     Week 3 Results: Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 3:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji32ManishSolanki55VishnuReddy199724NathanAlvares2444Anil_g22SudeepGhatakNZ40eetuRobo18Nived_Nambiar28Tjan8David_MA22   Week 4 Results: Congratulations to the Week 4 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 4:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji11FLMike31Sayan11ManishSolanki16VishnuReddy199710creativeopinion14Akshansh-Sharma3SudeepGhatakNZ7claudiovc2CFernandes5 misc2Nived_Nambiar5 Usernametwice232rzaneti5 eetuRobo2   Anil_g2   SharonS2  

Check Out | 2024 Release Wave 2 Plans for Microsoft Dynamics 365 and Microsoft Power Platform

On July 16, 2024, we published the 2024 release wave 2 plans for Microsoft Dynamics 365 and Microsoft Power Platform. These plans are a compilation of the new capabilities planned to be released between October 2024 to March 2025. This release introduces a wealth of new features designed to enhance customer understanding and improve overall user experience, showcasing our dedication to driving digital transformation for our customers and partners.    The upcoming wave is centered around utilizing advanced AI and Microsoft Copilot technologies to enhance user productivity and streamline operations across diverse business applications. These enhancements include intelligent automation, AI-powered insights, and immersive user experiences that are designed to break down barriers between data, insights, and individuals. Watch a summary of the release highlights.    Discover the latest features that empower organizations to operate more efficiently and adaptively. From AI-driven sales insights and customer service enhancements to predictive analytics in supply chain management and autonomous financial processes, the new capabilities enable businesses to proactively address challenges and capitalize on opportunities.    

Updates to Transitions in the Power Platform Communities

We're embarking on a journey to enhance your experience by transitioning to a new community platform. Our team has been diligently working to create a fresh community site, leveraging the very Dynamics 365 and Power Platform tools our community advocates for.  We started this journey with transitioning Copilot Studio forums and blogs in June. The move marks the beginning of a new chapter, and we're eager for you to be a part of it. The rest of the Power Platform product sites will be moving over this summer.   Stay tuned for more updates as we get closer to the launch. We can't wait to welcome you to our new community space, designed with you in mind. Let's connect, learn, and grow together.   Here's to new beginnings and endless possibilities!   If you have any questions, observations or concerns throughout this process please go to https://aka.ms/PPCommSupport.   To stay up to date on the latest details of this migration and other important Community updates subscribe to our News and Announcements forums: Copilot Studio, Power Apps, Power Automate, Power Pages

Users online (1,321)