Hi there,
I have a flow where a user uses a PowerApps application and then presses a button. This then activates the flow and sends an email to the user with a list of their answers. This part works perfectly.
I also want to be able to save the contents of the email to a PDF on Onedrive. I am aware how to do this using a message ID for an incoming message. I have been referring to this thread:
https://powerusers.microsoft.com/t5/Building-Flows/save-email-as-pdf/td-p/109005
However, when sending a message, no 'Message Id' is created, meaning I can not save the contents using the same method. (See below)
Is there a way to either generate a message Id upon the action send an email, or is there some other way to export the contents of the email directly to a PDF without the need for a message Id?
Thanks
Accepted Solutions
Hi @Toasteroven,
I'm afraid if we want to save the email completely. Export email action is the most effective method at the moment, but it requires a certain Message Id.
The content output by Send an email has almost nothing to exploit.
The advice I can give is to use Get emails (V2) to get the Message Id, but the Id obtained may be not necessarily the id of the message sent by send an message.
Because this method is going to "Send Items" folder to get the latest email, but not necessarily during the execution of the Flow period, there may be other emails sent.
1. Anyway, you could try to configure To, From field to match the information of all the emails you find, which is the same as the configuration in the send an message action.
2.Folder selects "Send Items", the maximum number is 1.
3.Add Delay action (5s-10s), wait for the mail to be sent, and have been saved in "Send Items".
This may give you the desired email, but it may not be accurate.
You could then configure the resulting Message Id in Export email.
Image reference:
Take a try.
Best Regards,
Barry
Hi @Toasteroven,
I'm afraid if we want to save the email completely. Export email action is the most effective method at the moment, but it requires a certain Message Id.
The content output by Send an email has almost nothing to exploit.
The advice I can give is to use Get emails (V2) to get the Message Id, but the Id obtained may be not necessarily the id of the message sent by send an message.
Because this method is going to "Send Items" folder to get the latest email, but not necessarily during the execution of the Flow period, there may be other emails sent.
1. Anyway, you could try to configure To, From field to match the information of all the emails you find, which is the same as the configuration in the send an message action.
2.Folder selects "Send Items", the maximum number is 1.
3.Add Delay action (5s-10s), wait for the mail to be sent, and have been saved in "Send Items".
This may give you the desired email, but it may not be accurate.
You could then configure the resulting Message Id in Export email.
Image reference:
Take a try.
Best Regards,
Barry
One slight issue sorry.
Once the file has been created, the date it says the email was sent on is very wrong. It seems to think the email was sent 25 hours before it actually was (see picture). I am assuming this is a tie zone error. I am in New Zealand.
Cheers
Hi Barry, It is still happening.
As you can see from the image below, I started the flow at 8.47 AM. The first email arrived at 8.47 AM and the second email with the PDF arrived at 8.48 AM. The PDF in the second email is based on the contents of the first email.
This PDF lists the time of the first email as 7.47 PM the previous day.
It is always 25 hours behind my time zone for some reason.
Any ideas?
Cheers
Helpful resources
Dear Community Members, We'd like to let you know of an upcoming change to the community platform: starting July 16th, the platform will transition to a READ ONLY mode until July 22nd. During this period, members will not be able to Kudo, Comment, or Reply to any posts. On July 22nd, please be on the lookout for a message sent to the email address registered on your community profile. This email is crucial as it will contain your unique code and link to register for the new platform encompassing all of the communities. What to Expect in the New Community: A more unified experience where all products, including Power Apps, Power Automate, Copilot Studio, and Power Pages, will be accessible from one community.Community Blogs that you can syndicate and link to for automatic updates. We appreciate your understanding and cooperation during this transition. Stay tuned for the exciting new features and a seamless community experience ahead!
We are excited to announce the Summer of Solutions Challenge! This challenge is kicking off on Monday, June 17th and will run for (4) weeks. The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions to as many questions as you can. Answers can be provided in all the communities. Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”) - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024 Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods. You must enter into each weekly Entry Period separately. How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different. Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers. At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing. Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner. A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random. Individuals will be contacted before the announcement with the opportunity to claim or deny the prize. Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners. Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event. ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE** Week 1 Results: Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Community MembersNumber SolutionsSuper UsersNumber Solutions Deenuji 9 @NathanAlvares24 17 @Anil_g 7 @ManishSolanki 13 @eetuRobo 5 @David_MA 10 @VishnuReddy1997 5 @SpongYe 9JhonatanOB19932 (tie) @Nived_Nambiar 8 @maltie 2 (tie) @PA-Noob 2 (tie) @LukeMcG 2 (tie) @tgut03 2 (tie) Week 2 Results: Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 2: Community MembersSolutionsSuper UsersSolutionsPower Automate @Deenuji 12@ManishSolanki 19 @Anil_g 10 @NathanAlvares24 17 @VishnuReddy1997 6 @Expiscornovus 10 @Tjan 5 @Nived_Nambiar 10 @eetuRobo 3 @SudeepGhatakNZ 8 Week 3 Results: Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 3:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji32ManishSolanki55VishnuReddy199724NathanAlvares2444Anil_g22SudeepGhatakNZ40eetuRobo18Nived_Nambiar28Tjan8David_MA22 Week 4 Results: Congratulations to the Week 4 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 4:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji11FLMike31Sayan11ManishSolanki16VishnuReddy199710creativeopinion14Akshansh-Sharma3SudeepGhatakNZ7claudiovc2CFernandes5 misc2Nived_Nambiar5 Usernametwice232rzaneti5 eetuRobo2 Anil_g2 SharonS2
On July 16, 2024, we published the 2024 release wave 2 plans for Microsoft Dynamics 365 and Microsoft Power Platform. These plans are a compilation of the new capabilities planned to be released between October 2024 to March 2025. This release introduces a wealth of new features designed to enhance customer understanding and improve overall user experience, showcasing our dedication to driving digital transformation for our customers and partners. The upcoming wave is centered around utilizing advanced AI and Microsoft Copilot technologies to enhance user productivity and streamline operations across diverse business applications. These enhancements include intelligent automation, AI-powered insights, and immersive user experiences that are designed to break down barriers between data, insights, and individuals. Watch a summary of the release highlights. Discover the latest features that empower organizations to operate more efficiently and adaptively. From AI-driven sales insights and customer service enhancements to predictive analytics in supply chain management and autonomous financial processes, the new capabilities enable businesses to proactively address challenges and capitalize on opportunities.
We're embarking on a journey to enhance your experience by transitioning to a new community platform. Our team has been diligently working to create a fresh community site, leveraging the very Dynamics 365 and Power Platform tools our community advocates for. We started this journey with transitioning Copilot Studio forums and blogs in June. The move marks the beginning of a new chapter, and we're eager for you to be a part of it. The rest of the Power Platform product sites will be moving over this summer. Stay tuned for more updates as we get closer to the launch. We can't wait to welcome you to our new community space, designed with you in mind. Let's connect, learn, and grow together. Here's to new beginnings and endless possibilities! If you have any questions, observations or concerns throughout this process please go to https://aka.ms/PPCommSupport. To stay up to date on the latest details of this migration and other important Community updates subscribe to our News and Announcements forums: Copilot Studio, Power Apps, Power Automate, Power Pages
