cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
allan_t
Advocate III
Advocate III

SharePoint Update Item connector using UTC not local time when appending comments

Minor irritant, curious if anyone has a work around for this.  

  • Power Automate flow uses the Update Item connector for SharePoint
  • When the flow runs, the Update Item connector adds a comment to a list item, the list item setting for this column is to append the information.  This displays the user name and time-stamp when the comment was appended
  • The comment time-stamp is UTC, however our local time is Eastern Standard

 

I'm familiar with the Current Time connector and Convert Time connector, but I don't see a way to change the time-stamp for the Update item connector in the flow. 

 

Anyone know of a work around or setting for this?  

9 REPLIES 9

@allan_t Have you checked the Regional settings of your SharePoint site? I was running into this exact same problem last week. Even converted the time to my local time using the Convert Time Zone action and it was still displaying incorrectly. 

 

I realized the timezone was incorrect on my SP site. Once I switched that the utcNow() function worked.

creativeopinion_0-1701875091672.png

creativeopinion_1-1701875116638.png

creativeopinion_2-1701875133336.png

 

Hope this helps!


If I helped you solve your problem—please mark my post as a solution .
Consider giving me a 👍 if you liked my response!

👉 Watch my tutorials on YouTube
👉 Tips and Tricks on TikTok

Hi @allan_t 

 

You could use expression to convert UTC to Eastern Standard time as shown in the below example:

ManishSolanki_0-1701875080441.png

Expression needs to be added in the expression box as highlighted in the above screenshot:

convertFromUtc(utcNow(),'Eastern Standard Time','MM/dd/yy hh:mm tt')

 

If this helps & solves your problem, please remember to give a 👍 and accept my solution as it will help others in the future.

 

Thanks

Thanks
Manish Solanki
View my blog
Linkedin

I had tried that, but it won't work when you're dealing with a SharePoint column where content is appended.  The appended comment applies a time-stamp that we can't insert as an expression.   The green highlight is from the system time-stamp, not an expression that I used in the Update Item connector.  Everything after the time-stamp is dynamic content I provided in the Update Item connector.  

allan_t_0-1701875447445.png

 

I just checked that and the site setting is already set to Eastern Time zone.  

allan_t_0-1701876105882.png

I'm wondering if there is a similar regional setting for my Power Automate environment, perhaps that's causing it.  I can't find any similar setting for my Power Automate environment though.  

@allan_t Can you try to use a Convert time zone action and a Compose action?

 

In the Convert time zone action:

 

Base Time: Insert utcNow()

Source Time Zone: Search and select (UTC) Coordinated Universal Time

Destination Time Zone: Search and select your local time zone

Format String: Search and select round-trip

 

creativeopinion_0-1701885198658.png

 

In your compose action insert the dynamic content for your user name and use an expression to format the date and time if you'd like. I used this format:

yyyy-MM-dd HH:mm tt

creativeopinion_1-1701885339170.png

 

If you don't format the date and time, it'll display as shown in the outputs of the Convert timezone action.

creativeopinion_2-1701885395997.png

Confirm the date and time are correct. Use the output form this compose action in the Update Item action. 

 

Hope this helps!

If I helped you solve your problem—please mark my post as a solution .
Consider giving me a 👍 if you liked my response!

👉 Watch my tutorials on YouTube
👉 Tips and Tricks on TikTok

 

Thank you for the suggestion. I have tried that, but the user name and time-stamp applied by the Update Item connector on this type of column, is not editable, nor can you provide it via dynamic content.  

@allan_t Could you share a screenshot of your flow. It can help to provide more insight. 

Here's the full flow overview.  The connector I've highlighted in green is where the SharePoint list item is updated, using the Update Item connector.  

allan_t_0-1701897640317.png

In the Update Item connector, we're appending a comment to the list item.  

Column name is Comments, it's setting is to append the content.  

allan_t_1-1701897774027.png

The Update Item connector will add a comment to the Comments field, it contains dynamic content.  Eg. Internal approval request sent.  Requestor: <display name of requestor>.  Sent to: <display name of approver>.  I do not put the time-stamp in the comment, because the Update Item connector will display the name and time-stamp when the comment was logged.   

allan_t_2-1701897859385.png

 

Here's how the comment field is displayed after the item is updated.  The display name and time-stamp (in yellow) is not supplied by the connector, it's not dynamic content.  The text after the time-stamp is dynamic content.  

allan_t_3-1701898066613.png

If I were to put a converted time-stamp into the dynamic content, 2 time-stamps will be displayed and just confuse the user.  

 

Let me know what you think.  thx

 

 

 

 

I have checked the regional settings of my SharePoint site, there were indeed Eastern time zone so that didn't resolve it.   Thx  

Helpful resources

Announcements

Community will be READ ONLY July 16th, 5p PDT -July 22nd

Dear Community Members,   We'd like to let you know of an upcoming change to the community platform: starting July 16th, the platform will transition to a READ ONLY mode until July 22nd.   During this period, members will not be able to Kudo, Comment, or Reply to any posts.   On July 22nd, please be on the lookout for a message sent to the email address registered on your community profile. This email is crucial as it will contain your unique code and link to register for the new platform encompassing all of the communities.   What to Expect in the New Community: A more unified experience where all products, including Power Apps, Power Automate, Copilot Studio, and Power Pages, will be accessible from one community.Community Blogs that you can syndicate and link to for automatic updates. We appreciate your understanding and cooperation during this transition. Stay tuned for the exciting new features and a seamless community experience ahead!

Summer of Solutions | Week 4 Results | Winners will be posted on July 24th

We are excited to announce the Summer of Solutions Challenge!    This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**   Week 1 Results: Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Community MembersNumber SolutionsSuper UsersNumber Solutions Deenuji 9 @NathanAlvares24  17 @Anil_g  7 @ManishSolanki  13 @eetuRobo  5 @David_MA  10 @VishnuReddy1997  5 @SpongYe  9JhonatanOB19932 (tie) @Nived_Nambiar  8 @maltie  2 (tie)   @PA-Noob  2 (tie)   @LukeMcG  2 (tie)   @tgut03  2 (tie)       Week 2 Results: Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 2: Community MembersSolutionsSuper UsersSolutionsPower Automate  @Deenuji  12@ManishSolanki 19 @Anil_g  10 @NathanAlvares24  17 @VishnuReddy1997  6 @Expiscornovus  10 @Tjan  5 @Nived_Nambiar  10 @eetuRobo  3 @SudeepGhatakNZ 8     Week 3 Results: Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 3:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji32ManishSolanki55VishnuReddy199724NathanAlvares2444Anil_g22SudeepGhatakNZ40eetuRobo18Nived_Nambiar28Tjan8David_MA22   Week 4 Results: Congratulations to the Week 4 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 4:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji11FLMike31Sayan11ManishSolanki16VishnuReddy199710creativeopinion14Akshansh-Sharma3SudeepGhatakNZ7claudiovc2CFernandes5 misc2Nived_Nambiar5 Usernametwice232rzaneti5 eetuRobo2   Anil_g2   SharonS2  

Check Out | 2024 Release Wave 2 Plans for Microsoft Dynamics 365 and Microsoft Power Platform

On July 16, 2024, we published the 2024 release wave 2 plans for Microsoft Dynamics 365 and Microsoft Power Platform. These plans are a compilation of the new capabilities planned to be released between October 2024 to March 2025. This release introduces a wealth of new features designed to enhance customer understanding and improve overall user experience, showcasing our dedication to driving digital transformation for our customers and partners.    The upcoming wave is centered around utilizing advanced AI and Microsoft Copilot technologies to enhance user productivity and streamline operations across diverse business applications. These enhancements include intelligent automation, AI-powered insights, and immersive user experiences that are designed to break down barriers between data, insights, and individuals. Watch a summary of the release highlights.    Discover the latest features that empower organizations to operate more efficiently and adaptively. From AI-driven sales insights and customer service enhancements to predictive analytics in supply chain management and autonomous financial processes, the new capabilities enable businesses to proactively address challenges and capitalize on opportunities.    

Updates to Transitions in the Power Platform Communities

We're embarking on a journey to enhance your experience by transitioning to a new community platform. Our team has been diligently working to create a fresh community site, leveraging the very Dynamics 365 and Power Platform tools our community advocates for.  We started this journey with transitioning Copilot Studio forums and blogs in June. The move marks the beginning of a new chapter, and we're eager for you to be a part of it. The rest of the Power Platform product sites will be moving over this summer.   Stay tuned for more updates as we get closer to the launch. We can't wait to welcome you to our new community space, designed with you in mind. Let's connect, learn, and grow together.   Here's to new beginnings and endless possibilities!   If you have any questions, observations or concerns throughout this process please go to https://aka.ms/PPCommSupport.   To stay up to date on the latest details of this migration and other important Community updates subscribe to our News and Announcements forums: Copilot Studio, Power Apps, Power Automate, Power Pages

Users online (1,431)