cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Rkaur
Helper IV
Helper IV

Unable to close opportunity as WON/LOST using flow

Using Flow, i am creating an opportunity and then as part of soem other logic, i need to close the same opportunity as WON/LOST in the same flow .

However i get the error

{\"error\":{\"code\":\"0x80040216\",\"message\":\
"This message can not be used to set the state of opportunity to won. In order to set state of opportunity to won, use the won message instead. \"type\":\"Microsoft.Dynamics.Solution.Common.CrmInvalidOperationException.

 

I have been using three fields to achieve teh same

1 actual close date

2. status (WON)

3. status reason (WON)

 

KIndly assist.

1 ACCEPTED SOLUTION

Accepted Solutions

Hi there,

I'm not sure if anyone is still having an issue with doing a Closed Won on the Opportunity, but we have managed to action it successfully.  The trick that we had was that instead of updating the Opportunity we had to create an Opportunity Close Activity and set the Status Reason/Status as Won.  This was the last step in our workflow and we now have it updating successfully.

Create Opportunity Close Activity.jpg

View solution in original post

10 REPLIES 10
edgonzales
Most Valuable Professional
Most Valuable Professional

@Rkaur 

Hi there!

What does the rest of the Flow look like?  Are all of the required fields in the opportunity filled in?  Closing an opportunity has a few sub-jobs so D365 (assuming that's your CRM?) may be yelling at you because of that.  I did see this in the ideas side, so I'm wondering if it's not totally possible yet.

Show us the rest of the process and we'll see what we can do. 🙂

 

-Ed-

 

 

If this reply has answered your question or resolved your challenge, please consider marking it as a Solution. This helps other users find it more easily via search.

Hi Ed,

 

Thanks for your response.

So, when we close an Opportunitya s WON/LOST from CRM UI it also, it only takes the three fields i mentioned above which are auto populated there except for the status reason.  Hence, i mapped the  same fields in my flow with the status reason as WON/LOST.

if there was any field missing it gives some other error to help identify.

 

But this error, im just not able to decode "In order to set state of opportunity to won, use the won message instead" What does won message mean?

IN other discussion forums i came across an API "LoseOpportunityRequest()"  https://community.dynamics.com/crm/f/microsoft-dynamics-crm-forum/164822/how-to-change-opportunity-e...

 

so does it mean that even when using c#code instead of updaterecord() method there is another method used to close opportunity. And if thats the case then thiss functionality may be hasnt yet been brought into FLows.

 

Would you have any idea around this ?

Any update on a resolution?  I'm running into the exact same issue

Hey.. theres no solution to this. its left open for me as well.

if you see the reply from Ed, he pointed out to ideas forum where the exact requirement has been mentioned.

so propbably we can just wait until teh solution comes or we may need to figure alternate way for now to make it working.

Ok thank you @Rkaur 

 

I also initially thought that I needed to set status values within the 'opportunity close' entity along with the 'opportunity' entity.  I tried every combination of running the flow with parallel steps, setting opp status first, setting opp close status first, etc. and still same errors.  Very frustrating this can be done through a crm workflow, but not within a flow.

@Rkaur @msm8504 @edgonzales I have had the same problem but found the solution at the end of the day.

First you need to create your opportunity without setting or updating your status. Just leave it empty

Screenshot (102)_LI.jpg

Second: You need to create a Opportunity Close activitities. With the created Opportunityid. From this point you can set your Opporunity status.

Screenshot (103)_LI.jpg

Anonymous
Not applicable

Hi! 

 

I have the same problem and I've tried your solution with adding the Opporunity Close Activities, but I still get an Error Message. 

 

In my flow(Power automate) the opporunity will be "Closed as won" after the manager have approved some documents and received a confirmation email. The Erreror message I get is: 

 

{
"error": {
"code": 502,
"source": "europe-002.azure-apim.net",
"clientRequestId": "3b7277d4-ed2e-4121-8b70-038b273ec715",
"message": "BadGateway",
"innerError": {
"status": 502,
"message": "--batchresponse_dce3e803-f50b-48eb-931a-1fe0cee85858\r\nContent-Type: application/http\r\nContent-Transfer-Encoding: binary\r\n\r\nHTTP/1.1 500 Internal Server Error\r\nREQ_ID: fcafe468-d2c9-4efa-bfa2-a2eff1b454aa\r\nContent-Type: application/json; odata.metadata=minimal\r\nOData-Version: 4.0\r\n\r\n{\"error\":{\"code\":\"0x80040216\",\"message\":\"An unexpected error occurred.\",\"innererror\":{\"message\":\"An unexpected error occurred.\",\"type\":\"System.ServiceModel.FaultException`1[[Microsoft.Xrm.Sdk.OrganizationServiceFault, Microsoft.Xrm.Sdk, Version=9.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35]]\",\"stacktrace\":\" at Microsoft.Crm.Extensibility.OrganizationSdkServiceInternal.Execute(OrganizationRequest request, InvocationContext invocationContext, CallerOriginToken callerOriginToken, WebServiceType serviceType, Boolean checkAdminMode, ExecutionContext executionContext, Dictionary`2 optionalParameters)\\r\\n at Microsoft.Crm.Extensibility.OData.CrmODataExecutionContext.Upsert(Entity entity)\\r\\n at Microsoft.Crm.Extensibility.OData.CrmODataExecutionContext.Update(Entity entity, UpdateOption updateOption)\\r\\n at Microsoft.Crm.Extensibility.OData.CrmODataServiceDataProvider.UpdateEdmEntity(CrmODataExecutionContext context, String edmEntityName, String entityKeyValue, EdmEntityObject entityObject)\\r\\n at Microsoft.Crm.Extensibility.OData.EntityController.PatchEntityImplementation(String& entityName, String key, EdmEntityObject entityDelta)\\r\\n at Microsoft.PowerApps.CoreFramework.ActivityLoggerExtensions.Execute[TResult](ILogger logger, EventId eventId, ActivityType activityType, Func`1 func, IEnumerable`1 additionalCustomProperties)\\r\\n at Microsoft.Xrm.Telemetry.XrmTelemetryExtensions.Execute[TResult](ILogger logger, XrmTelemetryActivityType activityType, Func`1 func)\\r\\n at lambda_method(Closure , Object , Object[] )\\r\\n at System.Web.Http.Controllers.ReflectedHttpActionDescriptor.ActionExecutor.<>c__DisplayClass10.<GetExecutor>b__9(Object instance, Object[] methodParameters)\\r\\n at System.Web.Http.Controllers.ReflectedHttpActionDescriptor.ExecuteAsync(HttpControllerContext controllerContext, IDictionary`2 arguments, CancellationToken cancellationToken)\\r\\n--- End of stack trace from previous location where exception was thrown ---\\r\\n at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()\\r\\n at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)\\r\\n at System.Web.Http.Controllers.ApiControllerActionInvoker.<InvokeActionAsyncCore>d__0.MoveNext()\\r\\n--- End of stack trace from previous location where exception was thrown ---\\r\\n at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()\\r\\n at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)\\r\\n at System.Web.Http.Controllers.ActionFilterResult.<ExecuteAsync>d__2.MoveNext()\\r\\n--- End of stack trace from previous location where exception was thrown ---\\r\\n at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()\\r\\n at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)\\r\\n at System.Web.Http.Dispatcher.HttpControllerDispatcher.<SendAsync>d__1.MoveNext()\"}}}\r\n--batchresponse_dce3e803-f50b-48eb-931a-1fe0cee85858--",
"source": "felleskjopettest.crm4.dynamics.com",
"errors": [],
"debugInfo": "clientRequestId: 3b7277d4-ed2e-4121-8b70-038b273ec715"
}
 
 
Have anyone seen this before or have any solution to this issue?  🙂

Hi there,

I'm not sure if anyone is still having an issue with doing a Closed Won on the Opportunity, but we have managed to action it successfully.  The trick that we had was that instead of updating the Opportunity we had to create an Opportunity Close Activity and set the Status Reason/Status as Won.  This was the last step in our workflow and we now have it updating successfully.

Create Opportunity Close Activity.jpg

I am encountering this same problem but have not been able to resolve it. 

I get the following error. I cannot tell which field is missing or has bad data: 

"An error occurred while validating input parameters: Microsoft.OData.ODataException: Does not support untyped value in non-open type."

 

 

Here is the flow: 

 

any suggestion on how to resolve this?

The image was left off of the previous postThe image was left off of the previous post

Helpful resources

Announcements

Community will be READ ONLY July 16th, 5p PDT -July 22nd

Dear Community Members,   We'd like to let you know of an upcoming change to the community platform: starting July 16th, the platform will transition to a READ ONLY mode until July 22nd.   During this period, members will not be able to Kudo, Comment, or Reply to any posts.   On July 22nd, please be on the lookout for a message sent to the email address registered on your community profile. This email is crucial as it will contain your unique code and link to register for the new platform encompassing all of the communities.   What to Expect in the New Community: A more unified experience where all products, including Power Apps, Power Automate, Copilot Studio, and Power Pages, will be accessible from one community.Community Blogs that you can syndicate and link to for automatic updates. We appreciate your understanding and cooperation during this transition. Stay tuned for the exciting new features and a seamless community experience ahead!

Summer of Solutions | Week 4 Results | Winners will be posted on July 24th

We are excited to announce the Summer of Solutions Challenge!    This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**   Week 1 Results: Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Community MembersNumber SolutionsSuper UsersNumber Solutions Deenuji 9 @NathanAlvares24  17 @Anil_g  7 @ManishSolanki  13 @eetuRobo  5 @David_MA  10 @VishnuReddy1997  5 @SpongYe  9JhonatanOB19932 (tie) @Nived_Nambiar  8 @maltie  2 (tie)   @PA-Noob  2 (tie)   @LukeMcG  2 (tie)   @tgut03  2 (tie)       Week 2 Results: Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 2: Community MembersSolutionsSuper UsersSolutionsPower Automate  @Deenuji  12@ManishSolanki 19 @Anil_g  10 @NathanAlvares24  17 @VishnuReddy1997  6 @Expiscornovus  10 @Tjan  5 @Nived_Nambiar  10 @eetuRobo  3 @SudeepGhatakNZ 8     Week 3 Results: Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 3:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji32ManishSolanki55VishnuReddy199724NathanAlvares2444Anil_g22SudeepGhatakNZ40eetuRobo18Nived_Nambiar28Tjan8David_MA22   Week 4 Results: Congratulations to the Week 4 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 4:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji11FLMike31Sayan11ManishSolanki16VishnuReddy199710creativeopinion14Akshansh-Sharma3SudeepGhatakNZ7claudiovc2CFernandes5 misc2Nived_Nambiar5 Usernametwice232rzaneti5 eetuRobo2   Anil_g2   SharonS2  

Check Out | 2024 Release Wave 2 Plans for Microsoft Dynamics 365 and Microsoft Power Platform

On July 16, 2024, we published the 2024 release wave 2 plans for Microsoft Dynamics 365 and Microsoft Power Platform. These plans are a compilation of the new capabilities planned to be released between October 2024 to March 2025. This release introduces a wealth of new features designed to enhance customer understanding and improve overall user experience, showcasing our dedication to driving digital transformation for our customers and partners.    The upcoming wave is centered around utilizing advanced AI and Microsoft Copilot technologies to enhance user productivity and streamline operations across diverse business applications. These enhancements include intelligent automation, AI-powered insights, and immersive user experiences that are designed to break down barriers between data, insights, and individuals. Watch a summary of the release highlights.    Discover the latest features that empower organizations to operate more efficiently and adaptively. From AI-driven sales insights and customer service enhancements to predictive analytics in supply chain management and autonomous financial processes, the new capabilities enable businesses to proactively address challenges and capitalize on opportunities.    

Updates to Transitions in the Power Platform Communities

We're embarking on a journey to enhance your experience by transitioning to a new community platform. Our team has been diligently working to create a fresh community site, leveraging the very Dynamics 365 and Power Platform tools our community advocates for.  We started this journey with transitioning Copilot Studio forums and blogs in June. The move marks the beginning of a new chapter, and we're eager for you to be a part of it. The rest of the Power Platform product sites will be moving over this summer.   Stay tuned for more updates as we get closer to the launch. We can't wait to welcome you to our new community space, designed with you in mind. Let's connect, learn, and grow together.   Here's to new beginnings and endless possibilities!   If you have any questions, observations or concerns throughout this process please go to https://aka.ms/PPCommSupport.   To stay up to date on the latest details of this migration and other important Community updates subscribe to our News and Announcements forums: Copilot Studio, Power Apps, Power Automate, Power Pages

Users online (946)