cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
pcoombe
Resolver I
Resolver I

How to prevent a status change to 'completed' unless 'Has Attachments' is set to Yes

Hi Everyone

 

I have a SharePoint form which utilises a status field (dropdown box). Ideally I want to prevent the user from selecting the value of '3-Completed' if HasAttachments is set to No. Currently the workaround I have is a workflow which emails a number of people to say form x has been completed with no attachment; however there must be a neater way of doing this by setting a control on one field which will prevent the user from selecting a value based on the value of another field. So I only want status = '3-Completed' where HasAttachments = On otherwise I want to be provide an error msg when user attempts to save form as '3-Completed' where HasAttachments = Off. 

 

Is this possible? 

 

In a prior post I was kindly advised to use the following formula on the status field OnChange function but this just kept erroring with the function countrows has too many arguments 

 

If(
   DataCardValue2.Selected.Value="3-Completed" &&
   CountRows(DataCardValue17.Attachments)=0,
   Notify(
      "You need to add an attachment,
      NotificationType.Error
   );
   Reset(DataCardValue2)
)

 

1 ACCEPTED SOLUTION

Accepted Solutions

HI thankyou so much for your help here. I was finally able to get this working using the following OnChange formula against my status. thankyou so much for your involvement here.

 

If(
DataCardValue2.Selected.Value="3-Completed" &&
CountRows(DataCardValue18.Attachments)=0,
Notify(
"Contract missing. Please add contract paperwork in the Attach Contract Section",
NotificationType.Error
);
Reset(DataCardValue2)
)

View solution in original post

6 REPLIES 6
Anonymous
Not applicable

@pcoombe Hello!

 

I had an similar scenario and I was able to solve it by make the dropdown with the "status" simply not show the option "Finished" if a certain critiera wasnt met.

 

See if you can figure it out by reading this thread:

https://powerusers.microsoft.com/t5/Building-Power-Apps/Need-help-with-code-if-Ismatch-related/m-p/6...

v-qiaqi-msft
Community Support
Community Support

Hi@pcoombe,

Based on the issue that you mentioned, do you want to prevent the Dropdown from selecting "3-Completed" if a toggle corresponding to HasAttachments is set to "off"?

I want to confirm two points with you:

  1. How you define whether an attachment is uploaded, manually set the Toggle value, or something else?
  2. Is there a validation within Toggle to change its value based on if there is an attachment within Attachment control?

I have a test on my side, here is my scenario:

  1. Add an EditForm with 2 fields, 'ContractStatus', Attachments and a custom card 'HasAttachments'
  2. Toggle.Value changes based on whether an Attachment control has files

I have a test on my side, please take a try as below.

//Set the Default property of the Toggle control as below:

 

If(IsEmpty(DataCardValue3.Attachments),false,true)

 

Note: DataCardValue3 represents the Attachment control

//Set the DisplayMode property of the corresponding DataCardValue to 'ContractStatus' as below:

 

If(
    Toggle2.Value = false && DataCardValue2.Selected.Value = "3-Completed",
    Disabled,
    Edit
)

 

Note: DataCardValue2 represents the Dropdown corresponding to the 'ContractStatus' field.

//If you want to provide an error message when a user attempts to save the form as '3-Completed' where HasAttachments = Off, you could set the OnSelect property of the Submit Button as below:

 

If(
    DataCardValue2.DisplayMode = Disabled,
    Notify(
        "You need to add an attachment!",
        NotificationType.Error
    ),
    SubmitForm(Form1)
)

 

Please check the following Gif for reference.0825Gif1.gif

Best Regards,

Qi

Best Regards,
Qi

Hi 

 

thankyou for your response, however if I try to write that formula out on my contract status field, it is telling me that the datacardvalue2 (which is the status dropdown) has an invalid argument type. Would you know how to fix this?

Hi@pcoombe,

What is your DataCardValue12?

In my scenario, a control corresponding to your DataCardValue12 is a Toggle which is used to identify whether there is an Attachment or not.

Have you read the premise of my solution? I explain all the conditions in my test scenario which is posted in my previous reply.

If your DataCardValue12 is a Toggle, please modify your formula as below

 

If(
    DataCardValue12.Value = false && DataCardValue2.Selected.Value = "3-Completed",
    Disabled,
    Edit
)

 

Best Regards,

Qi

Best Regards,
Qi

ok so I got your solution to work but it is not quite what I am after. I see that if the toggle is set to false I can still select Completed, only when I do, it greys out the status until I then select the toggle to On, when the status field becomes editable again. this is not quite right, but I do appreciate your solution. What I want is the ability to not select Completed and probably give an error msg if the has attachments toggle is set to no and someone tries to set status to completed. 

HI thankyou so much for your help here. I was finally able to get this working using the following OnChange formula against my status. thankyou so much for your involvement here.

 

If(
DataCardValue2.Selected.Value="3-Completed" &&
CountRows(DataCardValue18.Attachments)=0,
Notify(
"Contract missing. Please add contract paperwork in the Attach Contract Section",
NotificationType.Error
);
Reset(DataCardValue2)
)

Helpful resources

Announcements

Community will be READ ONLY July 16th, 5p PDT -July 22nd

Dear Community Members,   We'd like to let you know of an upcoming change to the community platform: starting July 16th, the platform will transition to a READ ONLY mode until July 22nd.   During this period, members will not be able to Kudo, Comment, or Reply to any posts.   On July 22nd, please be on the lookout for a message sent to the email address registered on your community profile. This email is crucial as it will contain your unique code and link to register for the new platform encompassing all of the communities.   What to Expect in the New Community: A more unified experience where all products, including Power Apps, Power Automate, Copilot Studio, and Power Pages, will be accessible from one community.Community Blogs that you can syndicate and link to for automatic updates. We appreciate your understanding and cooperation during this transition. Stay tuned for the exciting new features and a seamless community experience ahead!

Summer of Solutions | Week 4 Results | Winners will be posted on July 24th

We are excited to announce the Summer of Solutions Challenge!   This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions in the Forums to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**   Week 1 Results: Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Community MembersNumber of SolutionsSuper UsersNumber of Solutions @anandm08  23 @WarrenBelz  31 @DBO_DV  10 @Amik  19 AmínAA 6 @mmbr1606  12 @rzuber  4 @happyume  7 @Giraldoj  3@ANB 6 (tie)   @SpongYe  6 (tie)     Week 2 Results: Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Community MembersSolutionsSuper UsersSolutions @anandm08  10@WarrenBelz 25 @DBO_DV  6@mmbr1606 14 @AmínAA 4 @Amik  12 @royg  3 @ANB  10 @AllanDeCastro  2 @SunilPashikanti  5 @Michaelfp  2 @FLMike  5 @eduardo_izzo  2   Meekou 2   @rzuber  2   @Velegandla  2     @PowerPlatform-P  2   @Micaiah  2     Week 3 Results: Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Week 3:Community MembersSolutionsSuper UsersSolutionsPower Apps anandm0861WarrenBelz86DBO_DV25Amik66Michaelfp13mmbr160647Giraldoj13FLMike31AmínAA13SpongYe27     Week 4 Results: Congratulations to the Week 4 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Week 4:Community MembersSolutionsSuper UsersSolutionsPower Apps DBO-DV21WarranBelz26Giraldoj7mmbr160618Muzammmil_0695067Amik14samfawzi_acml6FLMike12tzuber6ANB8   SunilPashikanti8

Check Out | 2024 Release Wave 2 Plans for Microsoft Dynamics 365 and Microsoft Power Platform

On July 16, 2024, we published the 2024 release wave 2 plans for Microsoft Dynamics 365 and Microsoft Power Platform. These plans are a compilation of the new capabilities planned to be released between October 2024 to March 2025. This release introduces a wealth of new features designed to enhance customer understanding and improve overall user experience, showcasing our dedication to driving digital transformation for our customers and partners.    The upcoming wave is centered around utilizing advanced AI and Microsoft Copilot technologies to enhance user productivity and streamline operations across diverse business applications. These enhancements include intelligent automation, AI-powered insights, and immersive user experiences that are designed to break down barriers between data, insights, and individuals. Watch a summary of the release highlights.    Discover the latest features that empower organizations to operate more efficiently and adaptively. From AI-driven sales insights and customer service enhancements to predictive analytics in supply chain management and autonomous financial processes, the new capabilities enable businesses to proactively address challenges and capitalize on opportunities.    

Updates to Transitions in the Power Platform Communities

We're embarking on a journey to enhance your experience by transitioning to a new community platform. Our team has been diligently working to create a fresh community site, leveraging the very Dynamics 365 and Power Platform tools our community advocates for.  We started this journey with transitioning Copilot Studio forums and blogs in June. The move marks the beginning of a new chapter, and we're eager for you to be a part of it. The rest of the Power Platform product sites will be moving over this summer.   Stay tuned for more updates as we get closer to the launch. We can't wait to welcome you to our new community space, designed with you in mind. Let's connect, learn, and grow together.   Here's to new beginnings and endless possibilities!   If you have any questions, observations or concerns throughout this process please go to https://aka.ms/PPCommSupport.   To stay up to date on the latest details of this migration and other important Community updates subscribe to our News and Announcements forums: Copilot Studio, Power Apps, Power Automate, Power Pages

Users online (1,207)