Navigate to a specific screen based on multiple selections (conditions)

[Samurai89]

Hi again,

I have a screen (ScreenEmployeeDetails) that displays a column chart with an employee's work hours for a specific month. You can select the employee from a drop-down list (DropdownEmployee) and select the month in a gallery on the left (GalleryMonth). I also have a screen for each month (ScreenJuly17, ScreenAugust17, ScreenSeptember17, etc.) with a data table for each month (I could not figure out how to display a different data table on one screen based on what you select in a drop-down list (DropdownMonth).

On the ScreenEmployeeDetails screen, I have a button (ButtonMonthData) that should navigate to a specific screen based on the selected month (MonthYear=GalleryMonth.Selected.MonthYear), however, I can't seem to get this to work.

For example, if you select 'July17' in the gallery and you press the 'ButtonMonthData' button, it should navigate to ScreenJuly17.

Any help would be appreciated.

[v-xida-msft]

Hi @Samurai89,

Do you add one screen for each month within the GalleryMonth?

Do you want to navigate to corresponding screen based on the selected month in the GalleryMonth?

I have made a test on my side, I think the If function could achieve your needs, please take a try with the following workaround:

Set the TemplateFill proeprty of the GalleryMonth to following:

If(ThisItem.IsSelected, RGBA( 255, 105, 180, 1 ), RGBA(0,0,0,0))

Set the OnSelect proeprty of the "ButtonMonthData" button to following:

If(
    GalleryMonth.Selected.Value = "July17",
    Navigate(ScreenJuly17,ScreenTransition.Fade),
    GalleryMonth.Selected.Value = "August17",
    Navigate(ScreenAugust17, ScreenTransition.Fade),
    GalleryMonth.Selected.Value = "September17",
    Navigate(ScreenSeptember17,ScreenTransition.Fade)
)

On your side, you should type:

If(
    GalleryMonth.Selected.Value = "July17",
    Navigate(ScreenJuly17, ScreenTransition.Fade),
    GalleryMonth.Selected.Value = "August17",
    Navigate(ScreenAugust17, ScreenTransition.Fade),
    GalleryMonth.Selected.Value = "September17",
    Navigate(ScreenSeptember17, ScreenTransition.Fade),
    GalleryMonth.Selected.Value = "October17",
    Navigate(ScreenOctober17, ScreenTransition.Fade),
    ...
)

The GIF screenshot as below:

More details about the If function, please check the following article:

If function

Best regards,

Kris

[Samurai89 · Accepted solution]

Hi @v-xida-msft,

Your solution almost worked - I had to change 

GalleryMonth.Selected.Value

to

GalleryMonth.Selected.MonthYear

 since it did not accept .Value

Now it works great! Thank you for your assistance! 

[v-xida-msft · Accepted solution]

Hi @Samurai89,

Have you solved your problem?

If you have solved your problem, please go ahead and click “Accept as Solution” so that this thread will be marked for other users to easily identify.

Best regards,

Kris