Hi All,
I'm trying to navaigate the powerapps screen based on the value in the 'status' column.
I'm checking the condition on 'Onstart' event, but nothing is happening.
I'm using below conditon.
If(DataCardValue66.Selected.Value="Approved",Navigate(Screen1,ScreenTransition.Fade))
'DataCardValue66.Selected.Value' will have the value of status column.
Is it the correct apporach?
Solved! Go to Solution.
Hi @Harikrishnan,
I think you have some misunderstanding with the OnStart property of the FormScreen1 of the custom form of your SP list.
There are some limitations in SharePointIntegration control within custom form of SP list. The properties for the SharePointIntegration control may not be available in OnStart or OnVisible of FormScreen1 of the custom form of your SP list.
In addition, the OnStart property of the FormScreen1 of the custom form could only be fired once when the list is loaded. In other words, when you open the app (custom form) via clicking "New" button, "Edit" button or "Edit" button, the OnStart event would be fired. After that, when you click "New" button, "Edit" button or "Edit" button again within your SP list, the OnStart event would not be fired.
More details about the limits in SharePointIntegration control, please check the following article:
As an alternative solution, you could consider take a try to add your If formula within the OnEdit or OnView property of the SharePointIntegration control as below:
OnEdit:
Refresh('YourSPList'); /* <- Add formula here */
EditForm(SharePointForm1); If(SharePointIntegration.Selected.Status.Value = "Approved", Navigate(Screen1,ScreenTransition.Fade)) /* Add formula here*/
OnView:
Refresh('YourSPList'); /* <- Add formula here */
ViewForm(SharePointForm1); If(SharePointIntegration.Selected.Status.Value = "Approved", Navigate(Screen1,ScreenTransition.Fade)) /* <- Add formula here */
Best regards,
Kris
Typically you could do this, but I don't think you can use Navigate() in the OnStart event. I think it's the same logic that keeps you from being able to Navigate() in the OnVisible event of a form. (Pitfalls of a WYSIWYG editor.)
In a similar situation, I have used a Timer control with a duration of 1ms that fires the necessary code to navigate. More brutish than optimal, but it gets the job done.
Hi @Harikrishnan,
Could you please share a bit more about your scenario?
How do you run your app? Using a PowerApps app URL link or open/run your app manually?
Further, do you custom a form for your SP list using PowerApps?
If you run your app from your PowerApps, I think there is something wrong with your formula. When you run your app first time, the Data forms (Edit form and Display form) would not be initialized, so the DataCardValue66.Selected.Value formula would return blank/null.
If you run your app from the custom form of your SP list, please modify your formula as below:
Set the OnEdit property of the SharePointIntegration control to following:
EditForm(SharePointForm1); If(DataCardValue66.Selected.Value="Approved", Navigate(Screen1,ScreenTransition.Fade))
Set the OnView property of the SharePointIntegration control to following:
ViewForm(SharePointForm1); If(DataCardValue66.Selected.Value="Approved", Navigate(Screen1,ScreenTransition.Fade))
If you could provide more details about your scenario, we would provide a proper workaround for you.
Best regards,
Kris
Hi all,
Thank you four reply.
I'm using a custom list form using power apps. So not accessing the form from the powerapps.
I'm able to achive this using timer. Instead of accessing the 'status' from datacard I used sharePoint integration property. So the formula on 'OnTimerEnd' will be
If(SharePointIntegration.Selected.Status.Value="Approved",Navigate(Screen1,ScreenTransition.Fade))
But not sure why this is not working on 'OnStart' event.
Hi @Harikrishnan,
I think you have some misunderstanding with the OnStart property of the FormScreen1 of the custom form of your SP list.
There are some limitations in SharePointIntegration control within custom form of SP list. The properties for the SharePointIntegration control may not be available in OnStart or OnVisible of FormScreen1 of the custom form of your SP list.
In addition, the OnStart property of the FormScreen1 of the custom form could only be fired once when the list is loaded. In other words, when you open the app (custom form) via clicking "New" button, "Edit" button or "Edit" button, the OnStart event would be fired. After that, when you click "New" button, "Edit" button or "Edit" button again within your SP list, the OnStart event would not be fired.
More details about the limits in SharePointIntegration control, please check the following article:
As an alternative solution, you could consider take a try to add your If formula within the OnEdit or OnView property of the SharePointIntegration control as below:
OnEdit:
Refresh('YourSPList'); /* <- Add formula here */
EditForm(SharePointForm1); If(SharePointIntegration.Selected.Status.Value = "Approved", Navigate(Screen1,ScreenTransition.Fade)) /* Add formula here*/
OnView:
Refresh('YourSPList'); /* <- Add formula here */
ViewForm(SharePointForm1); If(SharePointIntegration.Selected.Status.Value = "Approved", Navigate(Screen1,ScreenTransition.Fade)) /* <- Add formula here */
Best regards,
Kris
Dear Community Members, We'd like to let you know of an upcoming change to the community platform: starting July 16th, the platform will transition to a READ ONLY mode until July 22nd. During this period, members will not be able to Kudo, Comment, or Reply to any posts. On July 22nd, please be on the lookout for a message sent to the email address registered on your community profile. This email is crucial as it will contain your unique code and link to register for the new platform encompassing all of the communities. What to Expect in the New Community: A more unified experience where all products, including Power Apps, Power Automate, Copilot Studio, and Power Pages, will be accessible from one community.Community Blogs that you can syndicate and link to for automatic updates. We appreciate your understanding and cooperation during this transition. Stay tuned for the exciting new features and a seamless community experience ahead!
We are excited to announce the Summer of Solutions Challenge! This challenge is kicking off on Monday, June 17th and will run for (4) weeks. The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions in the Forums to as many questions as you can. Answers can be provided in all the communities. Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”) - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024 Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods. You must enter into each weekly Entry Period separately. How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different. Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers. At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing. Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner. A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random. Individuals will be contacted before the announcement with the opportunity to claim or deny the prize. Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners. Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event. ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE** Week 1 Results: Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Community MembersNumber of SolutionsSuper UsersNumber of Solutions @anandm08 23 @WarrenBelz 31 @DBO_DV 10 @Amik 19 AmínAA 6 @mmbr1606 12 @rzuber 4 @happyume 7 @Giraldoj 3@ANB 6 (tie) @SpongYe 6 (tie) Week 2 Results: Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Community MembersSolutionsSuper UsersSolutions @anandm08 10@WarrenBelz 25 @DBO_DV 6@mmbr1606 14 @AmínAA 4 @Amik 12 @royg 3 @ANB 10 @AllanDeCastro 2 @SunilPashikanti 5 @Michaelfp 2 @FLMike 5 @eduardo_izzo 2 Meekou 2 @rzuber 2 @Velegandla 2 @PowerPlatform-P 2 @Micaiah 2 Week 3 Results: Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 3:Community MembersSolutionsSuper UsersSolutionsPower Apps anandm0861WarrenBelz86DBO_DV25Amik66Michaelfp13mmbr160647Giraldoj13FLMike31AmínAA13SpongYe27 Week 4 Results: Congratulations to the Week 4 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 4:Community MembersSolutionsSuper UsersSolutionsPower Apps DBO-DV21WarranBelz26Giraldoj7mmbr160618Muzammmil_0695067Amik14samfawzi_acml6FLMike12tzuber6ANB8 SunilPashikanti8
On July 16, 2024, we published the 2024 release wave 2 plans for Microsoft Dynamics 365 and Microsoft Power Platform. These plans are a compilation of the new capabilities planned to be released between October 2024 to March 2025. This release introduces a wealth of new features designed to enhance customer understanding and improve overall user experience, showcasing our dedication to driving digital transformation for our customers and partners. The upcoming wave is centered around utilizing advanced AI and Microsoft Copilot technologies to enhance user productivity and streamline operations across diverse business applications. These enhancements include intelligent automation, AI-powered insights, and immersive user experiences that are designed to break down barriers between data, insights, and individuals. Watch a summary of the release highlights. Discover the latest features that empower organizations to operate more efficiently and adaptively. From AI-driven sales insights and customer service enhancements to predictive analytics in supply chain management and autonomous financial processes, the new capabilities enable businesses to proactively address challenges and capitalize on opportunities.
We're embarking on a journey to enhance your experience by transitioning to a new community platform. Our team has been diligently working to create a fresh community site, leveraging the very Dynamics 365 and Power Platform tools our community advocates for. We started this journey with transitioning Copilot Studio forums and blogs in June. The move marks the beginning of a new chapter, and we're eager for you to be a part of it. The rest of the Power Platform product sites will be moving over this summer. Stay tuned for more updates as we get closer to the launch. We can't wait to welcome you to our new community space, designed with you in mind. Let's connect, learn, and grow together. Here's to new beginnings and endless possibilities! If you have any questions, observations or concerns throughout this process please go to https://aka.ms/PPCommSupport. To stay up to date on the latest details of this migration and other important Community updates subscribe to our News and Announcements forums: Copilot Studio, Power Apps, Power Automate, Power Pages