checkboxes check on makes other uncheck

[polska2180]

I googled this and saw some examples but couldn't follow.  I will have multiple checkboxes that onCheck will show a card.  What I want is when I check another box it shows a different card and unchecks all other boxes or previous box.

[MRNBagtas]

Hi, @polska2180! 

I tried to do your scenario. Please see below:

Screen layout

When the "Uncheck Others" box is checked checkboxes 1-4 will be unchecked.

1. Uncheckbox Properties:

OnUncheck: UpdateContext({ResetCheckbox:false})

OnCheck: UpdateContext({ResetCheckbox:true})

2. Checkboxes 1-4 Properties:

Reset: ResetCheckbox

Let me know if this helps 🙂 

[polska2180]

Thanks for the quick response, I'm not sure that is doing what I want let me further explain.

I have 9 checkboxes each when selected shows a card, when unselected it shows all cards (ie the other 8 cards that corespond to the other 8 checkboxes)  

current state I am able to select multiple boxes and whichever I selected last it shows that card however the other boxes remain checked.  When I go to press one of the other checkboxes it obviously then onchecks that box and all cards show up but any checkbox that was checked remains checked.  

What I like to do is on each selection of a checkbox to have the previous and all other checkboxes reset to unchecked state and the box that is checked have that card showing.  Hope this makes sense. 

[polska2180 · Accepted solution]

So here is what I found to be the solution which as it typically is, is much easier then I thought...

If(ShowCard = "Do",true, false)

...so becasue the check mark shows a card this shows a check mark on card show and doesn't when it doesn't, so I will mark this as a solution. 

That said the operation is a bit wonky, and to not complicate this thread I guess I will start a new one with a new set of criteria (hope that is appropriate for this forum.)

[patgat96]

One of the solutions I did, which isn't really "optimal" but it works better than any other solutions I've found is:

Checkbox1 OnCheck:

Select(Button1)

Button1 OnSelect:

Reset(Checkbox2)

Checkbox2 OnCheck:

Select(Button2)

Button2 OnSelect:

Reset(Checkbox1)

I think because there are extra items on the app, it'll be less optimal (even if the buttons are made invisible). I think if you only have a few checkboxes needing to be used, it should be fine.