cancel
Showing results for 
Search instead for 
Did you mean: 
Reply

Send Keys not working in PAD after PAD update - any alternatives?

In a PAD Workflow I am using the Send Keys function to do a copy and paste of a formula from 1 cell to another (control + C and then control + V), in an Excel file. 

The copy and paste occurs inside of a data table due to the "automatically" generated formula in the data table not being correct. 

 

The Send Keys function has previously been working without any issue, however after I updated my PAD application to the newest version, the control + c and the control + v does not do anything within the workflow. 

The function does not throw an error message, it just does not do the function that it is supposed to.

 

I have tried to resolve the issue by restarting my computer, as I have previously experienced that this would resolve the issue after the PAD application update. 

 

Anybody has any idea on why the Send Keys function is not working?

See the settings on the function below - please note that I have tried to adjust the Delay between keystrokes from the default value to 60, just to see if that would make a difference (no difference).

 

I have also tried to insert the Press/Hold function before the copy, without any luck.  

Identity47_0-1692450289453.png

 

I have read in other PAD posts on the Send Keys function that the Send Keys is prone to error and some users recommend not to use it due to this. 

However if I were not to use the Send Keys function, how would you suggest to copy and paste a formula from 1 cell to another?

 

Using a the screen recorder to record the copy and paste actions in Excel?

I have previously used the screen recorder for another part of my workflow, however I find it a bit unstable/unpredictable in terms of doing what I actually wanted it to do.

 

Thanks in advance. 

8 REPLIES 8

Hi @Identity47 ,

 

Here's what has worked for me in the past.  Confirm you can send any keys during this step; it is most likely not a send keys issue.  Look at the preceding step and confirm those are actually successful.

 

 

If this was helpful: Please mark as a solution Give me a thumbs up Always glad to help, Tom! Connect on LinkedIn

Hi @Identity47 

 

Instead of using send keys for copy paste operations, use below vbscript to copy the formula from one cell to another 

 

 

Set objExcel = CreateObject("Excel.Application")
objExcel.Visible = True

Set objWorkbook = objExcel.Workbooks.Open("D:\Temp\data.xlsx")
Set objWorksheet = objWorkbook.Worksheets("Sheet1") ' Change to your sheet name

' Copy the formula from source cell
sourceCellFormula = objWorksheet.Range("D2").Formula

' Paste the formula to destination cell
objWorksheet.Range("D3").Formula = sourceCellFormula

' Save and close the workbook
objWorkbook.Save
objWorkbook.Close

' Quit Excel
objExcel.Quit

' Release objects
Set objWorksheet = Nothing
Set objWorkbook = Nothing
Set objExcel = Nothing

 

Use Run VBScript action for this to run the vbscript like below:

Nived_Nambiar_0-1692460346894.png

 

 

Or if you are trying to do an autofilling approach use below vbscript :

 

 

Set objExcel = CreateObject("Excel.Application")
objExcel.Visible = True

Set objWorkbook = objExcel.Workbooks.Open("C:\Path\To\Your\Workbook.xlsx")
Set objWorksheet = objWorkbook.Worksheets("Sheet1") ' Change to your sheet name

' Source cell address
sourceCellAddress = "D2"

' Destination range for autofill
destinationRange = objWorksheet.Range("D3:D10") ' Adjust this range as needed

' Get the source formula
sourceCellFormula = objWorksheet.Range(sourceCellAddress).Formula

' Set the formula in the source cell
objWorksheet.Range(sourceCellAddress).Formula = sourceCellFormula

' Autofill the formula to the destination range
objWorksheet.Range(sourceCellAddress).AutoFill Destination:=destinationRange, Type:=xlFillDefault

' Save and close the workbook
objWorkbook.Save
objWorkbook.Close

' Quit Excel
objExcel.Quit

' Release objects
Set objWorksheet = Nothing
Set objWorkbook = Nothing
Set objExcel = Nothing

 

 

Hope it helps !

Thanks & Regards,

Nived N 🚀

LinkedIn: Nived N's LinkedIn
YouTube: Nived N's YouTube Channel

🔍 Found my answer helpful? Please consider marking it as the solution!
Your appreciation keeps me motivated. Thank you! 🙌

Hi @Nived_Nambiar ,

 

Nice!  You just picked up another subscriber at YouTube!  Thanks for sharing this, I will definitely implement. 

 

 

If this was helpful: Please mark as a solution Give me a thumbs up Always glad to help, Tom! Connect on LinkedIn

Hi @trice602 

 

Thank you 🙂

 

 

Hi @trice602,

 

I am not quite sure what your suggestion for a solution is.

Do you think that something in a previous workflow step is preventing the Send Keys function to work properly?

I have had the Send Keys function to work properly before and even if after the PAD update, if I run the workflow separately the Send Keys functions working (I have combined multiple separate workflows into a combined workflow and included each of them as a subflow - if I run the workflows separately, the Send Keys function works)

 

I tried to adjust the parameters in the Send Keys function a bit, and I adjusted the Send Keys destination from "Foreground window" to "Window instance/handle" and inserted the Excel instance that the copy and paste is to be done in.

After this the Send Keys function with the copy and paste is working in the workflow.

Identity47_0-1692820358955.png

 

 

Oddly enough the Send Keys function is also working in other subflows, where I did not adjust the Send Keys destination (and the Send Keys function is in other sheets of the Excel file). 

Hi @Nived_Nambiar 

 

Thanks for the suggestion. 

 

I tried to implement the VBScript, however I cannot quite get it to work (please note that I am not experienced in VB or VBA). 

 

Set objExcel = CreateObject("Excel.Application")
objExcel.Visible = True

Set objWorkbook = objExcel.Workbooks.Activate("Filename")
' Obviously I am using the actual file path in the VBScript that I have tried to run
Set objWorksheet = objWorkbook.Worksheets("Data for waterfall") 
' Change to your sheet name

' Copy the formula from source cell
sourceCellFormula = objWorksheet.Range("M51").Formula

' Paste the formula to destination cell
SourceCellFormula = objWorksheet.Range("M53").Formula

I change the objWorkbook to an Activate function instead of Open function, as the Excel file is already open in the workflow. 

When I run it I can see that it activates Excel, but it does not do the copy and paste in the Excel file. 

Am I doing something wrong here in getting the VBScript to utilize the already open workbook?

Also, is it possible to reference to a workflow variable in the VBScript rather than having to insert the file path in the VBScript (such as the Excel instance, which is already a variable in the workflow)?

 

Finally, for the paste destination, I need this to be the second last row in a data table. Is there a way of making the VBScript do this as well, so that the destination cell becomes dynamic?

When I used the Send Keys function, I used the FirstFreeRows function to be able to get PAD to navigate to this. There will be added a new row each month when data is added to the Excel file and the workflow is run. 

 

Thanks in advance. 

Hi @Identity47 

 

 

I think FileName is a variable from power automate desktop here if i am right , if yes change the script like below

 

Set objExcel = CreateObject("Excel.Application")
objExcel.Visible = True

Set objWorkbook = objExcel.Workbooks.Activate(%Filename%)
' Obviously I am using the actual file path in the VBScript that I have tried to run
Set objWorksheet = objWorkbook.Worksheets("Data for waterfall") 
' Change to your sheet name

' Copy the formula from source cell
sourceCellFormula = objWorksheet.Range("M51").Formula

' Paste the formula to destination cell
SourceCellFormula = objWorksheet.Range("M53").Formula

 

 

Try this and let me know 🙂

Thanks & Regards,

Nived N 🚀

LinkedIn: Nived N's LinkedIn
YouTube: Nived N's YouTube Channel

🔍 Found my answer helpful? Please consider marking it as the solution!
Your appreciation keeps me motivated. Thank you! 🙌

Agnius
Most Valuable Professional
Most Valuable Professional

If you want to attach to a running Excel, you should not be creating the Excel object and instead you should "get" it. CreateObject is only used for when you want to launch a new instance of Excel.

 

Also, the Workbooks.Activate method is used differently - you should pass the file name like this - Workbooks("{FileName}").Activate.

 

Try this script (assuming that %FileName% contains an actual file name):

'Attach to a running instance of Excel
Set objExcel = GetObject(, "Excel.Application")

'Activate the workbook
Set objWorkbook = objExcel.Workbooks("%FileName%").Activate

'Activate the worksheet
Set objWorksheet = objWorkbook.Worksheets("Data for waterfall") 

' Copy the formula from source cell
sourceCellFormula = objWorksheet.Range("M51").Formula

' Paste the formula to destination cell
SourceCellFormula = objWorksheet.Range("M53").Formula

-------------------------------------------------------------------------
If I have answered your question, please mark it as the preferred solution. If you like my response, please give it a Thumbs Up.

I also provide paid consultancy and development services using Power Automate. If you're interested, DM me and we can discuss it.

-------------------------------------------------------------------------------------------------------------------------
If I have answered your question, please mark it as the preferred solution. If you like my response, please give it a Thumbs Up.
Regards, Agnius Bartninkas

Helpful resources

Announcements

Community will be READ ONLY July 16th, 5p PDT -July 22nd

Dear Community Members,   We'd like to let you know of an upcoming change to the community platform: starting July 16th, the platform will transition to a READ ONLY mode until July 22nd.   During this period, members will not be able to Kudo, Comment, or Reply to any posts.   On July 22nd, please be on the lookout for a message sent to the email address registered on your community profile. This email is crucial as it will contain your unique code and link to register for the new platform encompassing all of the communities.   What to Expect in the New Community: A more unified experience where all products, including Power Apps, Power Automate, Copilot Studio, and Power Pages, will be accessible from one community.Community Blogs that you can syndicate and link to for automatic updates. We appreciate your understanding and cooperation during this transition. Stay tuned for the exciting new features and a seamless community experience ahead!

Summer of Solutions | Week 4 Results | Winners will be posted on July 24th

We are excited to announce the Summer of Solutions Challenge!    This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**   Week 1 Results: Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Community MembersNumber SolutionsSuper UsersNumber Solutions Deenuji 9 @NathanAlvares24  17 @Anil_g  7 @ManishSolanki  13 @eetuRobo  5 @David_MA  10 @VishnuReddy1997  5 @SpongYe  9JhonatanOB19932 (tie) @Nived_Nambiar  8 @maltie  2 (tie)   @PA-Noob  2 (tie)   @LukeMcG  2 (tie)   @tgut03  2 (tie)       Week 2 Results: Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 2: Community MembersSolutionsSuper UsersSolutionsPower Automate  @Deenuji  12@ManishSolanki 19 @Anil_g  10 @NathanAlvares24  17 @VishnuReddy1997  6 @Expiscornovus  10 @Tjan  5 @Nived_Nambiar  10 @eetuRobo  3 @SudeepGhatakNZ 8     Week 3 Results: Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 3:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji32ManishSolanki55VishnuReddy199724NathanAlvares2444Anil_g22SudeepGhatakNZ40eetuRobo18Nived_Nambiar28Tjan8David_MA22   Week 4 Results: Congratulations to the Week 4 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 4:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji11FLMike31Sayan11ManishSolanki16VishnuReddy199710creativeopinion14Akshansh-Sharma3SudeepGhatakNZ7claudiovc2CFernandes5 misc2Nived_Nambiar5 Usernametwice232rzaneti5 eetuRobo2   Anil_g2   SharonS2  

Check Out | 2024 Release Wave 2 Plans for Microsoft Dynamics 365 and Microsoft Power Platform

On July 16, 2024, we published the 2024 release wave 2 plans for Microsoft Dynamics 365 and Microsoft Power Platform. These plans are a compilation of the new capabilities planned to be released between October 2024 to March 2025. This release introduces a wealth of new features designed to enhance customer understanding and improve overall user experience, showcasing our dedication to driving digital transformation for our customers and partners.    The upcoming wave is centered around utilizing advanced AI and Microsoft Copilot technologies to enhance user productivity and streamline operations across diverse business applications. These enhancements include intelligent automation, AI-powered insights, and immersive user experiences that are designed to break down barriers between data, insights, and individuals. Watch a summary of the release highlights.    Discover the latest features that empower organizations to operate more efficiently and adaptively. From AI-driven sales insights and customer service enhancements to predictive analytics in supply chain management and autonomous financial processes, the new capabilities enable businesses to proactively address challenges and capitalize on opportunities.    

Updates to Transitions in the Power Platform Communities

We're embarking on a journey to enhance your experience by transitioning to a new community platform. Our team has been diligently working to create a fresh community site, leveraging the very Dynamics 365 and Power Platform tools our community advocates for.  We started this journey with transitioning Copilot Studio forums and blogs in June. The move marks the beginning of a new chapter, and we're eager for you to be a part of it. The rest of the Power Platform product sites will be moving over this summer.   Stay tuned for more updates as we get closer to the launch. We can't wait to welcome you to our new community space, designed with you in mind. Let's connect, learn, and grow together.   Here's to new beginnings and endless possibilities!   If you have any questions, observations or concerns throughout this process please go to https://aka.ms/PPCommSupport.   To stay up to date on the latest details of this migration and other important Community updates subscribe to our News and Announcements forums: Copilot Studio, Power Apps, Power Automate, Power Pages

Users online (1,688)